Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Wharton, Cheshire West and Chester
Full bath re-enamelling and resurfacing in Wharton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
How the visit works
On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a full day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Advice
About our bath re-enamelling in Wharton
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include wear marks under the taps and a coating lifting around the plughole, across pressed steel baths, basins & shower trays and Victorian roll-tops.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Wharton (CW7, CW10)
- Region
- Cheshire West and Chester
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Your questions about bath re-enamelling in Wharton
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
When we’d advise against a repair
To be straight with you, there are a few things a repair will not fix:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Prices and what affects them
Prices start from £350. You’ll know the full cost before you book. We take into account:
- The colour and finish to match
- How many areas need work
- Where the damage is and how we get to it
- What the surface is made of
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from photos
Two or three clear photos are generally enough. Try to include:
- A coin beside the damage so we can judge size
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
Upload a photo of the damage and a wider shot of the whole item, and tell us you’re in Wharton, and we’ll come back with a fixed quote.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About Wharton
Wharton is about 1 mile east of Winsford, in Cheshire West and Chester. We travel to homes and businesses in Wharton and the surrounding area, so there’s no workshop to go to. We work in 224 places in Cheshire West and Chester. You can also see our page for Manchester, about 23 miles away.
All of CW7 and CW10 is within our area. Whether you live on New Road, Nat Lane and Esk Road or a nearby road, we can come to you. Being close to the A54 and A5018, Wharton is easy for our repair technicians to reach. We also travel to Winsford (1 mile west), Over (2 miles south-west), Salterswall (2 miles west), Darnhall (3 miles south-west) and Lea Green (3 miles south). Further out, we also cover Northwich (4 miles north), Frodsham (11 miles north-west), Hoole (15 miles west), Hartford (4 miles north-west), Greenbank (4 miles north) and Witton (5 miles north).
Landmarks near Wharton
Around Wharton, we work in homes near The Winsford Academy, Willow Wood Community Primary School and Christ Church, among other places. For rail, the closest station is Winsford station, about 0.6 miles south-east of the centre. Further afield, we also cover the area around Victoria Infirmary (4.6 miles north).
Nearby places to Wharton
What else we do in Wharton
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Repair or replace in Wharton?
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why us?
- Work done at your home or business
- Everything repaired in place
- No extra charge for your area
- Colour mixed on the day to match
See our prices page and guide to resurfacing and replacement costs.
How to look after the repair
After the repair has cured, a few habits help it last:
- Don’t leave a chip unrepaired
- Wash away dyes and oils after use
- Respect the curing time we give you
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
