Cumbria · England

Bath re-enamelling & resurfacing in Wharton, Cumbria

Full bath re-enamelling and resurfacing for homes and businesses in Wharton and across Cumbria. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A coloured bath you want in white
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Wharton

Bath re-enamelling in Wharton without replacing anything

Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for thin, worn enamel in places and chips and rust in more than one place, across acrylic baths, cast iron baths and Victorian roll-tops.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Location
Wharton (CA17)
Area hub
Cumbria
Warranty
A year, on every repair
Quote
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Repairs by material

Cast iron

Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

The process

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we are done and let you know when you can use it again.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s normally ready the day after.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Tell us about any previous repairs or coatings
  • Avoid using the area for a few hours before we arrive

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a free quote

Read more

Aftercare tips

How the surface is treated afterwards matters. Here’s what we suggest:

  • Get any chip repaired quickly
  • Do not let dyes or oils sit on the finish
  • Don’t leave bottles, razors or sponges standing on the surface
  • Clean with a soft cloth and mild detergent

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.

Common questions in Wharton

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

Can you fix a peeling bath coating?

Yes. Removing the old finish takes extra time, which we include in the price.

Do you charge for travel?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Can you resurface a pink bath in white?

Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.

Is it OK to have pets in the house?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Do you need to take the bath out?

Not at all. We work on the bath in place, with the room protected and ventilated.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What we’re called out for in Wharton

Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, normally first under the taps and around the waste.

Common reasons people in Wharton contact us include:

  • A peeling or bubbling previous coating
  • Worn patches where water runs and sits
  • Stains that won’t shift
  • A period or roll-top bath worth keeping

Questions to ask before you book

  • What protection goes down before work starts
  • How long it needs to cure
  • What happens if the damage is worse than the photos show
  • What the guarantee covers, and for how long

Our hiring checklist

Landlord and trade work in Wharton

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

What a repair can’t fix

We will always be straight with you, so here’s what a repair can’t fix:

  • Problems we cannot see until an old finish comes off
  • A metal bath with a through crack
  • Leaks from fittings rather than the bath

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths

How we price bath re-enamelling

Resurfacing from £350. Every quote is fixed and free. What we look at:

  • How hard the colour is to match
  • How easy the damage is to reach
  • Any earlier repairs that need removing first
  • How many items we do on one visit

Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

Quotes from your pictures

Most quotes are done from pictures alone. To make it quick:

  • Whether it’s been repaired or coated before
  • The material, if you know it
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area

For a price in Wharton, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Covering Wharton

Wharton is about 17 miles north-east of Kendal, in Cumbria. Our technicians come to homes and businesses in Wharton and the surrounding area, so there’s no workshop to go to. We cover all 438 towns and villages across Cumbria. We work right across the region, from Wharton to Newcastle upon Tyne (about 48 miles away).

All of CA17 is covered. If you are just outside Wharton, we cover Kirkby Stephen (2 miles north), Waitby (2 miles north-west), Smardale (3 miles north-west), Ravenstonedale (3 miles west) and Greenside (3 miles west). Further out, we also cover Appleby-in-Westmorland (11 miles north-west), Sedbergh (11 miles south-west), Bongate (10 miles north-west) and Shap (14 miles north-west).

Local landmarks in Wharton

We visit homes around Kirkby Stephen Grammar School, among other places. The closest station to Wharton is Kirkby Stephen station, about 1 mile north. A little further out are Lammerside Castle (under half a mile south-east). For a walk, there’s Birkett Common.

Map of Wharton © OpenStreetMap contributors

DIY kit or professional repair?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.