Sunderland · England
Bath re-enamelling & resurfacing in Whitburn, Sunderland
Full bath re-enamelling and resurfacing at your home in Whitburn, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- A peeling or bubbling previous coating
Prices and what affects them
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- Where the damage is and how we get to it
- What the surface is made of
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Before you send photos, a few simple things make all the difference:
- The postcode, so we can plan the visit
- One picture of the entire bath
- A clear, close picture of the problem area
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Bath re-enamelling in Whitburn, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We regularly repair pressed steel baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a coloured bath you want in white and chips and rust in more than one place.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Whitburn (SR6)
- County
- Sunderland
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Whitburn
More services for Whitburn
What a repair cannot fix
In fairness, there are a few things a repair will not fix:
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Questions from Whitburn
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How much does bath re-enamelling cost in Whitburn?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Landlords, agents and businesses in Whitburn
We work for landlords, letting agents and housing providers in Whitburn as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams in Sunderland and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What we do, step by step
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and we start. You can expect it to take the best part of a day, and we’ll tell you if anything changes.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
Getting a price
Send us a picture of the damage and a wider shot of the entire item, with your SR6 postcode, and we will come back with a fixed quote.
Advice
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why Whitburn customers choose us
- One visit for most repairs
- We leave the room as we found it
- Work done at your home or business
- Nothing taken out or refitted
Take a look at our prices page or guide to resurfacing and replacement costs.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- Do not leave a chip unrepaired
- Store bottles off the bath
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Covering Whitburn
Whitburn is about 3 miles south-east of South Shields, in Sunderland. Wherever you are in the SR6 postcode area, we come to you. Whitburn is one of 75 places in Sunderland we cover. Our jobs stretch from Whitburn to Newcastle upon Tyne (about 11 miles away).
All of SR6 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Bryers Street, Rupert Street and Bowman Street. Being close to the A183 and B1299, Whitburn is simple for us to get to. If you are just outside Whitburn, we cover South Bents (1 mile south), Seaburn (1 mile south), Seaburn Dene (2 miles south-west), Marsden (2 miles north) and Fulwell (2 miles south). Larger places within reach include Sunderland (4 miles south), Washington (7 miles south-west), Houghton-le-Spring (9 miles south-west), Hendon (4 miles south), Ford (4 miles south-west) and Hetton-le-Hole (10 miles south).
Around Whitburn
Our customers here include homes close to Whitburn Church of England Academy, St Mary's Church and Roker Park, among other places. The closest station to Whitburn is Seaburn station, roughly 1.8 miles south-west. Nearby you’ll also find Monkwearmouth Hospital (2.1 miles south) and Hylton Castle (3.7 miles south-west). Green spaces nearby include Cleadon Hills.
About our accreditations · Every repair comes with a one-year guarantee.
