Sunderland · England
Bath re-enamelling & resurfacing in Seaburn, Sunderland
Full bath re-enamelling and resurfacing for homes and businesses in Seaburn and across Sunderland. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
About our bath re-enamelling in Seaburn
We do not move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the next day. Our repair technicians work on basins & shower trays, acrylic baths and pressed steel baths, and common reasons people get in touch are a roll-top that’s seen better days and a bath in a colour that no longer suits.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Seaburn (SR6)
- County
- Sunderland
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Let us know which floor the room is on
- Ensure the area is dry
- Let us know if it has been repaired before
Getting a price
If you are in Seaburn and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Work for landlords and builders
If you manage property in Seaburn, we will quote for several properties at once. Send photos for each one and we will price them together.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Common problems we fix in Seaburn
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Common reasons people in Seaburn contact us include:
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
- A dull, rough surface that will not come clean
Before booking anyone
- Aftercare advice
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
- Who will actually do the work
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.
Why us?
- Everything repaired in place
- One visit for most repairs
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing or guide to resurfacing and replacement costs.
Aftercare tips
Once the work has cured, treat it gently:
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs straight away
- Repair dripping taps early
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Questions from Seaburn
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you quote from pictures?
Nearly always. If photos do not show enough, we will ask for another angle.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Our work in Seaburn
Seaburn is about 2 miles north of Sunniside, in Sunderland. Across the SR6 area, we come to you. Seaburn is one of 75 towns and villages in Sunderland we cover. Our jobs stretch from Seaburn to Newcastle upon Tyne (11 miles away).
All of SR6 is within our area, from the main roads to the quietest streets. Streets in the area include Sea Road, Browne Road and Park Avenue, and we cover them all. If you’re just outside Seaburn, we cover South Bents (1 mile north), Fulwell (1 mile south-west), Seaburn Dene (1 mile west), Whitburn (1 mile north) and Sunniside (2 miles south). Larger places within reach include Sunderland (3 miles south-west), Washington (7 miles west), Houghton-le-Spring (8 miles south-west), Ford (3 miles south-west), Hetton-le-Hole (8 miles south-west) and New Silksworth (5 miles south-west).
Local landmarks in Seaburn
Around Seaburn, we work in homes near Roker Park, St Andrew's Church and Fulwell Junior School and the streets around them. The closest station to Seaburn is Seaburn station, about 0.8 miles west. Further afield, we also cover the area around Monkwearmouth Hospital (1 mile south-west) and Hylton Castle (3.1 miles west). For a walk, there is Cleadon Hills.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Honest limits
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Nearby places to Seaburn
What else we do in Seaburn
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
