Hampshire · England

Bath re-enamelling & resurfacing in Whitchurch, Hampshire

We travel to Whitchurch for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • Several chips and rust patches
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Whitchurch

Bath re-enamelling at your home in Whitchurch

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We are frequently asked to fix staining under the taps and around the waste and an outdated colour you’d like to change, on basins & shower trays, acrylic baths and cast iron baths.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.

Location
Whitchurch (RG28)
County
Hampshire
Cover
A year, on every repair
Quotes
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Looking after it afterwards

How the surface is treated afterwards matters:

  • Use washing-up liquid and a soft cloth
  • A dripping tap should be fixed promptly
  • Never use suction bath mats
  • Don’t let dyes or oils sit on the finish

A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Do you need bath re-enamelling in Whitchurch?

The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.

Typical reasons for a call-out include:

  • A bath that stays dull however much you clean it
  • Chips and rust in more than one place
  • A roll-top that’s seen better days
  • A peeling or bubbling previous coating

Questions to ask before booking

  • If travel is included in the price
  • What protection goes down before work starts
  • Who will actually do the work
  • Whether the price is fixed and includes VAT

How to compare quotes

For landlords and businesses

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

We work for landlords, letting agents and housing providers in Whitchurch as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

Whitchurch questions

What does bath re-enamelling cost?

Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.

Do you need to take the bath out?

No, it stays where it is. We work on the bath in place, with the room masked and ventilated.

Can I add another job to the visit?

Of course, and it normally saves money. Just add the extra items to your pictures and you’ll get one combined price.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

Can you repair something that is been repaired before?

Yes, regularly. It can add a little time, which we include in the quote.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Repairs by material

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

About Whitchurch

Whitchurch is about 6 miles east of Andover, in Hampshire. Whether you’re in the middle of Whitchurch or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages. Our nearest city page is London, about 57 miles away.

Our repair technicians cover all of the RG28 postcode area and the streets around it. You’ll find streets such as London Road, Station Road and London Street, all of which we cover. Being close to the B3400, Whitchurch is simple for us to get to. We also cover the places around Whitchurch: Wells-in-the-Field (1 mile east), Freefolk (1 mile east), Cole Henley (2 miles north), Firgo (2 miles south) and Hurstbourne Priors (2 miles south-west). Larger places within reach include Basingstoke (10 miles east), Winchester (12 miles south), Andover (6 miles west), Tadley (12 miles north-east), Hyde (11 miles south) and Popley (12 miles east).

Landmarks near Whitchurch

In Whitchurch, that means homes near Testbourne Community School, Whitchurch Church of England Primary School and The Red House Public House. For rail, the closest station is Whitchurch (Hampshire) station, about 0.5 miles north of the centre.

Map of Whitchurch © OpenStreetMap contributors

The process

Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, and we finish by cleaning up and talking you through the result.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Let us know about parking or access
  • Point us to the nearest place to park

Ask for a price

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Send photos for a quote

Advice

When a repair is not the answer

It helps to know what we cannot do too:

  • An acrylic bath that flexes badly underfoot
  • Problems we can’t see until an old finish comes off
  • Holes rusted through the metal

Send us photos and we will tell you honestly before you book.

Materials we repair

  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

Prices and what affects them

Resurfacing from £350. There’s no area surcharge for Whitchurch. What changes the price is:

  • What the surface is made of
  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes

What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Quotes from your pictures

We price nearly every job from pictures. This is what we need:

  • A close-up of the damage, in focus
  • What it’s made of, if you know
  • A wider photo showing the entire bath
  • Your postcode, so we can check dates

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.