Warwickshire · England

Bath re-enamelling & resurfacing in Whitchurch, Warwickshire

Bath re-enamelling for Whitchurch, without a refit. Send us photos for a fixed price, then we come to you.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Whitchurch?

What happens on the day

You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. It typically takes a full day, and you can get on with other things while we are there.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Clear the area around the damage
  • Avoid using the area for a few hours before we arrive
  • Have somewhere for us to park nearby if possible

Getting a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Get a free quote

Related advice

Bath re-enamelling at your home in Whitchurch

Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a period or roll-top bath worth keeping and several chips and rust patches, we can normally put it right, on Victorian roll-tops, acrylic baths and basins & shower trays alike.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Location
Whitchurch (CV37)
Region
Warwickshire
Cover
One year on every repair
Price
From £350. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Get any chip repaired quickly
  • Wash away dyes and oils after use
  • Fix dripping taps quickly
  • Store bottles off the bath

Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

When we’d advise against a repair

We will always be straight with you, so here’s what a repair can’t fix:

  • A cast iron or steel bath that’s cracked right through
  • Leaking taps or wastes (a plumber’s job)
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we’ll give you a straight answer before you book.

Surfaces we repair

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.

FAQs for Whitchurch

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

What information do you need?

Just photos, your postcode and a contact number. On the day, access to the room.

Is there a guarantee?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Is there a smell?

Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.

Is a repair better than a new one?

Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Can you fix a peeling bath coating?

Usually, yes. The old coating comes off before we resurface it. Mention it when you send photos.

Can you redo someone else’s repair?

Yes, we frequently do. It can add a little time, which we include in the quote.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

How we price bath re-enamelling

Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:

  • Doing more than one item at once
  • How many areas need work
  • The material
  • Any earlier repairs that need removing first

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Getting a price from photos

Most quotes are done from pictures alone. To make it quick:

  • What it’s made of, if you know
  • Natural light rather than flash
  • A picture taken from further back
  • Details of any past repairs

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

What we are called out for in Whitchurch

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

Keep an eye out for these signs:

  • Lots of chips and rust spots
  • Wear marks under the taps
  • Brown or grey marks that do not clean off
  • A peeling or bubbling previous coating

What your quote should include

  • How long the guarantee is and what it covers
  • What prep work is covered
  • What aftercare is recommended
  • Who turns up on the day

Choosing a repair company

Covering Whitchurch

Whitchurch is about 4 miles south of Stratford-upon-Avon, in Warwickshire. Across the CV37 area, we carry out the work at your property. We cover all 324 towns and villages in Warwickshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 25 miles away.

Jobs in CV37 work the same way as everywhere else we cover. We also cover the places around Whitchurch: Alderminster (1 mile east), Newbold-on-Stour (3 miles south-east), Goldicote (3 miles north-east), Armscote (3 miles south-east) and Ettington (3 miles east). Larger places within reach include Warwick (11 miles north-east), Royal Leamington Spa (13 miles north-east), Stratford-upon-Avon (4 miles north), Leamington Spa (13 miles north-east), Kenilworth (15 miles north) and Southam (15 miles north-east).

What’s near Whitchurch

We visit homes around Church of St Mary. The nearest railway station is Stratford-upon-Avon station, about 4.4 miles north of the centre. Well-known places in the area include Tudor World (4 miles north) and Stratford Hospital (4.3 miles north).

Map of Whitchurch © OpenStreetMap contributors

For landlords and businesses

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.