Warwickshire · England
Bath re-enamelling & resurfacing in Armscote, Warwickshire
Bath re-enamelling in Armscote without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- A roll-top that’s seen better days
- Staining under the taps and around the waste
How we handle bath re-enamelling in Armscote
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Typical jobs include an outdated colour you’d like to change and chips and rust in more than one place, on cast iron baths, basins & shower trays and pressed steel baths.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Armscote (CV37)
- County
- Warwickshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Armscote?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The most common problems we’re called about are:
- An old resurfacing that is failing
- Enamel that is lost its shine and feels rough
- A roll-top that is seen better days
- Staining under the taps and around the waste
Comparing quotes
- What prep work is covered
- If travel is included in the price
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the pictures show
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Have chips seen to early
- Don’t let dyes or oils sit on the finish
- Avoid suction-cup mats
- Use washing-up liquid and a soft cloth
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
How it works
Arrival times are agreed in advance. Once we are there, the work takes a full day for most jobs. We leave the room clean.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Keep pets and children out of the room while we work
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
Getting a price
Most customers in Armscote get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
When a repair isn’t the answer
Before you book, it’s worth knowing the limits too:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think.
What we work on
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Our work in Armscote
Armscote is about 7 miles south-east of Stratford-upon-Avon, in Warwickshire. Jobs in Armscote are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our repair technicians cover all 324 towns and villages in Warwickshire, from the larger towns to small villages. Our jobs stretch from Armscote to Birmingham (28 miles away).
Here we cover the CV37 postcode area. Streets in the area include Middle Street and Ilmington Road, and we cover them all. We also cover the places around Armscote: Newbold-on-Stour (1 mile north), Halford (1 mile north-east), Alderminster (3 miles north), Ettington (3 miles north-east) and Whitchurch (3 miles north-west). Further out, we also cover Warwick (13 miles north), Royal Leamington Spa (14 miles north), Stratford-upon-Avon (7 miles north-west), Leamington Spa (14 miles north), Southam (15 miles north-east) and Alcester (13 miles north-west).
Near you in Armscote
Around Armscote, we work in homes near Newbold and Tredington CofE Primary School, Bird in Hand pub and St David's Church. Well-known places in the area include Ellen Badger Hospital (2.5 miles south). Open spaces near Armscote include Castle Hill.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Repairing versus replacing in Armscote
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking.
What you get with us
- Dust sheets down, tidy finish
- Most jobs done in one visit
- Free fixed quotes from pictures
- Colour mixed on the day to match
Take a look at our pricing or bath cost comparison.
Also near Armscote
Also in Armscote
What bath re-enamelling costs
Resurfacing from £350. There’s no area surcharge for Armscote. The price reflects:
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- The material
- What kind of damage it is
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- A picture taken from further back
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Armscote questions
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Warwickshire.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you fix a peeling bath coating?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
