Newtownabbey · Northern Ireland
Bath re-enamelling & resurfacing in Whiteabbey, Newtownabbey
Fixed-price bath re-enamelling in Whiteabbey and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
Bath re-enamelling in Whiteabbey, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s wear marks under the taps and several chips and rust patches, we can help.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Whiteabbey (BT37)
- County
- Newtownabbey
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
Simple care helps the repair last. We recommend:
- Don’t leave a chip unrepaired
- Dry the bath after use to stop limescale
- Do not leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Nearby places to Whiteabbey
More services for Whiteabbey
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes a full day. If we find something your photos didn’t show, we will explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
Ask for a price
Upload photos of the damage and one of the whole item, with your BT37 postcode, and we’ll reply with a fixed price.
Related advice
When to call us in Whiteabbey
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
Common reasons people in Whiteabbey contact us are:
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
Questions to ask before you book
- What happens if they find more damage
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- When it can be used again
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Repair or replace: which is better?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why book with us
- Technicians who travel to you, UK-wide
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
Read our full price list and bath cost comparison.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Honest limits
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
About Whiteabbey
Whiteabbey is about 2 miles east of Newtownabbey, in Newtownabbey. We travel to homes and businesses in Whiteabbey and nearby villages, so there’s no workshop to go to.
Jobs in BT37 are booked in the same way as anywhere else. We also travel to Newtownabbey (2 miles west), Holywood (4 miles south-east), Belfast (5 miles south), Carrickfergus (6 miles north-east) and Dundonald (7 miles south-east). For island and remote addresses, call first so we can plan the visit.
Around Whiteabbey
In Whiteabbey, that means homes near St James' Primary School and Nursery Unit, Abbey Community College and Church of the Ascension, among other places. A little further out are Museum at the Mill (2.1 miles north-west) and Belfast Castle (2.7 miles south-west). Green spaces nearby include Carnmoney Hill and Belfast Lough RSPB Reserve.
Whiteabbey questions
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
How do I get a price for bath re-enamelling in Whiteabbey?
Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What affects the price in Whiteabbey
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Whether old repairs or coatings need taking off
- The type of damage
- Where the damage is and how we get to it
- What the surface is made of
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- A picture taken from further back
- Any details about the material
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
