Swindon · England
Bath Re-enamelling for Wichelstowe homes
Bath re-enamelling across Wichelstowe and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Stains that won’t shift
- A dull, rough surface that won’t come clean
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How we handle bath re-enamelling in Wichelstowe
The bath stays where it is, so the taps, tiles and plumbing are not touched. It typically takes one visit, and can be used again the following day. Common call-outs are for wear marks under the taps and enamel that’s lost its shine and feels rough, on basins & shower trays, acrylic baths and cast iron baths.
You get a one-year guarantee, the same in Wichelstowe as everywhere else we work.
- Area
- Wichelstowe (SN1, SN5, SN4)
- Area hub
- Swindon
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Wichelstowe
We work for landlords, letting agents and housing providers in Wichelstowe as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What a repair can’t fix
We will not take on work that will not last, so these are the limits:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a full day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Open a window if you can
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Advice
Wichelstowe: your questions answered
Do you resurface freestanding baths?
Yes. Inside and out.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Are there extra charges for Wichelstowe?
We don’t add a call-out fee. Your fixed quote includes everything.
How to look after the repair
Nothing complicated is needed:
- Use washing-up liquid and a soft cloth
- Wash away dyes and oils after use
- Don’t leave a chip unrepaired
- Repair dripping taps early
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Towns and villages near Wichelstowe
Other services in Wichelstowe
Our work in Wichelstowe
Wichelstowe is about 1 mile south-east of Freshbrook, in Swindon. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover all 68 towns and villages across Swindon. Our nearest city page is Birmingham, about 64 miles away.
Here we cover the SN1, SN5 and SN4 postcode area. Streets in the area include Mill Lane, Arnhill Road and Marden Avenue, and we cover them all. We also cover the places around Wichelstowe: South Leaze (1 mile north-west), Toothill (1 mile north-west), Freshbrook (1 mile north-west), Lydiard Tregoze (2 miles west) and Shaw (2 miles north-west). Further out, we also cover Stratton St Margaret (4 miles north-east), Royal Wootton Bassett (4 miles west), Haydon Wick (3 miles north), Priory Vale (4 miles north), Upper Stratton (4 miles north-east) and Dorcan (4 miles east).
Local landmarks in Wichelstowe
Our customers here include homes close to Toothill Church, Swindon Central Library and East Wichel Primary School & Nursery. Nearby too are The Commonweal School (0.9 miles north-east), Town Gardens (1.2 miles east), The Ridgeway School and Sixth Form College (1.1 miles south-east) and The Village Tavern (0.9 miles north-west). The closest station to Wichelstowe is Swindon station, roughly 1.8 miles north-east of the centre. Further afield, we also cover the area around Rodbourne Cheney (2 miles north) and Royal Wiltshire Yeomanry Museum (1.4 miles north-east).
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Wichelstowe. The price reflects:
- Unusual colours or finishes
- How many areas need work
- What kind of damage it is
- How many items we do on one visit
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
How to get a fixed price
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- A wider photo showing the entire bath
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Any details about the material
Most customers in Wichelstowe get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Should you replace it?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Wichelstowe. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Wichelstowe
- We will tell you if it’s not worth repairing
- One-year guarantee on every repair
- Nothing taken out or refitted
- CHAS and Constructionline accredited
Read our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
