Worcestershire · England
Bath Re-enamelling in Wickhamford
Full bath re-enamelling and resurfacing for homes and businesses in Wickhamford and across Worcestershire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A roll-top that is seen better days
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Bath re-enamelling in Wickhamford without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. We regularly repair cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are a coating lifting around the plughole and lots of chips and rust spots.
Big or small, it’s backed by a one-year guarantee.
- Area
- Wickhamford (WR11, WR12)
- County
- Worcestershire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Wickhamford
More services for Wickhamford
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Worcestershire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
About Wickhamford
Wickhamford is about 2 miles south-east of Evesham, in Worcestershire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in 376 places across Worcestershire. We work right across the region, from Wickhamford to Birmingham (28 miles away).
Every address in WR11 and WR12 is within our area. Jobs here include addresses on Drysdale Close, Sally Close and Sandys Avenue. We also cover the places around Wickhamford: Bengeworth (2 miles north-west), Aldington (2 miles north), Evesham (2 miles north-west), Aston Somerville (2 miles south-west) and Hampton (3 miles north-west). Further out, we also cover Pershore (8 miles west), Warndon (15 miles north-west), St Peter the Great (15 miles north-west), Ronkswood (15 miles north-west), Greenlands (15 miles north) and Red Hill (15 miles north-west).
Landmarks near Wickhamford
In Wickhamford, that means homes near Church of St John the Baptist, The De Montfort School and Badsey First School. The nearest railway station is Evesham station, roughly 2.8 miles north-west of the centre. A little further out are The Almonry (2.5 miles north-west). Open spaces near Wickhamford include Greenhill.
Common questions in Wickhamford
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Leave the bath for the full curing time before using it
- Don’t let dyes or oils sit on the finish
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
When we’d advise against a repair
Before booking, it’s worth knowing the limits:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a full day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know which floor the room is on
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Repairing versus replacing in Wickhamford
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Free fixed quotes from pictures
- Typically one visit, start to finish
- One price list for the entire UK
- One-year guarantee on every repair
Take a look at our prices page or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- Whether we combine several jobs
- The material
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from photos
You can take the pictures on your phone, there is no need for anything special. Ensure they show:
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- The material, if you know it
- Good light, ideally daylight, without flash glare
To get a price, send two or three photos through our quote form or ring us. We’ll say straight away whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
