Kirklees · England
Bath re-enamelling & resurfacing in Wilberlee, Kirklees
Problem with your bath in Wilberlee? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Brown or grey marks that do not clean off
Our work in Wilberlee
Wilberlee is about 3 miles south-west of Longwood, in Kirklees. Whether you’re in the middle of Wilberlee or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 189 towns and villages across Kirklees. We work right across the region, from Wilberlee to Manchester (about 17 miles away).
All of HD7 is within our area. Other places close to Wilberlee include Lingards Wood (1 mile south), Slaithwaite Hall (1 mile south-west), Scammonden (2 miles north-west), Marsden (2 miles south-west) and Tunnel End (2 miles south-west). Further out, we also cover Huddersfield (5 miles east), Dewsbury (12 miles east), Batley (12 miles north-east), Mirfield (9 miles north-east), Liversedge (10 miles north-east) and Cleckheaton (10 miles north-east).
Near you in Wilberlee
In Wilberlee, that means homes near Shred Mission Church, Colne Valley High School and The Sun pub and the streets around them. The closest station to Wilberlee is Slaithwaite station, about 0.9 miles south-east. Other landmarks nearby include St. Luke's Hospital (3.7 miles east) and Holmfirth Postcard Museum (2 miles south). The countryside around Wilberlee includes Moorside Edge.
About our bath re-enamelling in Wilberlee
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and common reasons people get in touch are wear marks under the taps and a coloured bath you want in white.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Location
- Wilberlee (HD7)
- Area hub
- Kirklees
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
Landlord and trade work in Wilberlee
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Nearby places to Wilberlee
What else we do in Wilberlee
Keeping it looking good
Once the work has cured, treat it gently:
- Do not use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- Where the damage is and how we get to it
- What the surface is made of
- Whether we combine several jobs
- What kind of damage it is
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed price
Good pictures mean an accurate price. Here’s what we find most useful:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- Details of any past repairs
Send us photos of the damage and one of the entire item, with your HD7 postcode, and we will reply with a fixed quote.
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- A year’s guarantee on all work
- Rooms protected and left tidy
- Free fixed quotes from pictures
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or resurfacing vs replacement cost guide.
Questions from Wilberlee
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What happens next?
We come back with a fixed price, typically with dates to choose from. You’re under no obligation.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Can you repair something that is been repaired before?
Typically, yes. We remove the old repair before doing a new one, so let us know about it.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What we are called out for in Wilberlee
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
The most common problems we’re called about are:
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
Comparing quotes
- How changes to the job are handled
- When it can be used again
- The length of the guarantee and what it covers
- Whether a trained technician does the job
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
