Wiltshire · England
Bath re-enamelling & resurfacing in Wilcot, Wiltshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Wilcot. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An old resurfacing that’s failing
- Staining under the taps and around the waste
Bath re-enamelling in Wilcot without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean, we can normally put it right, whatever the material.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Where
- Wilcot (SN9)
- Area hub
- Wiltshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Questions from Wilcot
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we’ll quote them together.
Which areas do you work in?
Across the UK, so Wilcot is covered. Our prices are the same everywhere.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
What we can’t put right
Before you book, it’s worth knowing the limits:
- A bath that’s rusted through
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Covering Wilcot
Wilcot is about 8 miles east of Devizes, in Wiltshire. Across the SN9 area, we carry out the work at your property. Wilcot is one of 425 towns and villages in Wiltshire we cover. We work right across the region, from Wilcot to London (about 74 miles away).
Jobs in SN9 work the same way as everywhere else we cover. We also cover the places around Wilcot: Manningford Abbots (1 mile south), Woodborough (2 miles south-west), Alton Priors (2 miles west), Alton Barnes (2 miles west) and Manningford Bohune (2 miles south). Further out, we also cover Calne (11 miles north-west), Devizes (8 miles west), Melksham (14 miles west), Amesbury (13 miles south), Marlborough (6 miles north-east) and Bulford (11 miles south).
Near you in Wilcot
Typical jobs here are in homes near Pewsey Vale School and Church of the Holy Cross, among other places. The nearest railway station is Pewsey station, roughly 1.4 miles south-east of the centre. A little further out are Pewsey Heritage Centre (1.7 miles south-east). For a walk, there’s Knap Hill.
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before you book. We look at:
- The material
- What kind of damage it is
- How many areas need work
- Previous DIY repairs that have to come out
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what helps:
- One picture of the whole bath
- Natural light rather than flash
- A clear, close picture of the problem area
- Any earlier repairs or coatings
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Nearby places to Wilcot
More services for Wilcot
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Wilcot
- One-year guarantee on every repair
- No need to remove anything
- We leave the room as we found it
- Work done at your home or business
Read our pricing and resurfacing vs replacement cost guide.
What we are called out for in Wilcot
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted:
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
- Stains that won’t shift
- Several chips and rust patches
Before booking anyone
- Whether the price covers travel
- Aftercare advice
- A fixed price, and whether VAT is included
- What preparation is included
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
