Warwickshire · England
Bath re-enamelling & resurfacing in Willoughby, Warwickshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Willoughby. Send photos for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- Lots of chips and rust spots
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a full day. Before we go, we’ll explain when it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
Getting a price
Send us photos of the damage and a wider shot of the entire item, and tell us you’re in Willoughby, and we will come back with a fixed quote.
Advice
How we handle bath re-enamelling in Willoughby
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair Victorian roll-tops, cast iron baths and acrylic baths, and the jobs we see most are enamel that’s lost its shine and feels rough and worn patches where water runs and sits.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Willoughby (CV23)
- County
- Warwickshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Willoughby
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
The things clients usually mention when they call include:
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Stains that will not shift
What your quote should include
- What preparation is included
- Whether they match the colour on site
- What happens if the damage is worse than the pictures show
- How your room will be protected
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from photos. These are the things that affect it:
- The material and finish
- What kind of damage it is
- Doing more than one item at once
- How many areas need work
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- The material, if you know it
- Whether it’s been repaired or coated before
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
More services for Willoughby
Looking after it afterwards
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
- Don’t leave a chip unrepaired
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
When a repair is not the answer
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Common questions in Willoughby
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Do you charge for travel?
There is no separate call-out charge. Your fixed price includes everything.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Our work in Willoughby
Willoughby is about 4 miles north-west of Daventry, in Warwickshire. Clients in Willoughby get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Willoughby is one of 324 towns and villages in Warwickshire we cover. You can also see our page for Birmingham, about 30 miles away.
Our visits in CV23 work the same way as everywhere else we cover. From Main Street, Lower Street and Brooks Close or anywhere nearby, a technician can come to you. We also cover the places around Willoughby: Woolscott (1 mile west), Barby (2 miles north-east), Toft (3 miles north-west), Dunchurch (3 miles north-west) and Hillmorton (3 miles north). Larger places within reach include Rugby (5 miles north), Warwick (14 miles west), Royal Leamington Spa (12 miles west), Leamington Spa (12 miles west), Kenilworth (14 miles west) and Southam (7 miles south-west).
Landmarks near Willoughby
Locally, our jobs take us to homes close to The Rose Public House and Church of St Nicholas and the streets around them. Well-known places in the area include Hospital of St. Cross (4.3 miles north). The countryside around Willoughby includes Hensborough Hill.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Work for landlords and builders
Landlords, letting agents and housing providers in Willoughby use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
