Warwickshire · England
Bath Re-enamelling in Woolscott
Full bath re-enamelling and resurfacing at your home in Woolscott, with a one-year guarantee on every repair.
- Resurfacing from £350
- An old resurfacing that’s failing
- Wear marks under the taps

Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
What you get with us
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- No extra charge for your area
- Colour-matched on site
See our pricing and resurfacing vs replacement cost guide.
About our bath re-enamelling in Woolscott
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and common reasons people contact us are a period or roll-top bath worth keeping and brown or grey marks that don’t clean off.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

- Location
- Woolscott (CV23)
- Area hub
- Warwickshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Woolscott
Woolscott is about 4 miles south of Rugby, in Warwickshire. From the centre of Woolscott to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in all 324 towns and villages in Warwickshire. You can also see our page for Birmingham, about 28 miles away.
Our visits in CV23 work the same way as everywhere else we cover. Streets in the area include Castle Lane and Lower Green, all of which we cover. We also cover the places around Woolscott: Willoughby (1 mile east), Toft (2 miles north-west), Dunchurch (2 miles north), Barby (3 miles north-east) and Hillmorton (4 miles north-east). Within a short drive, we also cover Rugby (4 miles north), Warwick (13 miles west), Royal Leamington Spa (11 miles west), Bedworth (15 miles north-west), Leamington Spa (11 miles west) and Kenilworth (13 miles west).
Around Woolscott
We visit homes around Church of St Peter and The Shoulder of Mutton Public House, among other places. Further afield, we also cover the area around Hospital of St. Cross (4 miles north). Not far away are Hensborough Hill.
Your questions about bath re-enamelling in Woolscott
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What areas do you cover?
All of Warwickshire, and the rest of the UK. Travel is included in the price.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Signs you need bath re-enamelling in Woolscott
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
People normally call us after spotting something like this:
- Stains that won’t shift
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
- A coloured bath you want in white
Questions to ask before you book
- What preparation is included
- How your room will be protected
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
What we do, step by step
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a full day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Make sure the area is dry
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
How to get a price
Most clients in Woolscott get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Related advice
When we’d advise against a repair
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- A bath split right through the body
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Woolscott
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Looking after it afterwards
Aftercare is simple:
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- Respect the curing time we give you
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Landlords, agents and businesses in Woolscott
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Places near Woolscott
More services for Woolscott
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Access to the area
- The size and number of damaged areas
- Previous DIY repairs that have to come out
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed quote
Two or three clear photos are generally enough. It helps if you send:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- Any details about the material
- A wider photo showing the entire bath
If you are in Woolscott and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.

