East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Wilsthorpe, East Riding of Yorkshire
Damaged bath in Wilsthorpe? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- Chips and rust in more than one place
Bath re-enamelling in Wilsthorpe, done in place
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. Common call-outs are for a dull, rough surface that won’t come clean and a bath in a colour that no longer suits, on acrylic baths, cast iron baths and Victorian roll-tops.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Wilsthorpe (YO15)
- Region
- East Riding of Yorkshire
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Wilsthorpe. What changes the price is:
- The colour and finish to match
- Whether we combine several jobs
- The material and finish
- Where the damage is and how we get to it
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- The material, if you know it
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Questions from Wilsthorpe
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Is there a call-out fee?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Do you cover Wilsthorpe?
Yes. We work across the UK and travel to Wilsthorpe and the rest of East Riding of Yorkshire. Send pictures and we’ll quote, or call 0345 017 0787.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Repairing versus replacing in Wilsthorpe
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
What you get with us
- Usually one visit, start to finish
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
See our pricing or bath cost comparison.
How the visit works
We turn up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
- Tell us about parking, stairs or access
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
When a repair is not the answer
It helps to know what we can’t do:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Aftercare tips
So the finish stays in good condition for years:
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
- Fix dripping taps quickly
- Wash away dyes and oils after use
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Covering Wilsthorpe
Wilsthorpe is about 2 miles south-west of Bridlington, in East Riding of Yorkshire. Across the YO15 area, we come to you. Wilsthorpe is one of 299 towns and villages in East Riding of Yorkshire we cover. Our nearest city page is Leeds, about 57 miles away.
Jobs in YO15 work the same way as everywhere else we cover. Nearby, we also work in Hilderthorpe (1 mile north-east), Bessingby (1 mile north-west), Carnaby (1 mile west), Easton (2 miles north-west) and Haisthorpe (2 miles west). We also work in nearby towns such as Driffield (10 miles south-west), Hornsea (11 miles south), Flamborough (5 miles north-east), Nafferton (8 miles south-west), Leven (13 miles south) and Hutton Cranswick (12 miles south-west).
Around Wilsthorpe
Typical jobs here are in homes near Hilderthorpe Primary School, Bridlington School and Church of St Magnus and the streets around them. The closest station to Wilsthorpe is Bridlington station, about 1.5 miles north-east. Further afield, we also cover the area around Bridlington Hospital (1.5 miles north) and Beside The Seaside Museum (1.6 miles north-east).
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Common problems we fix in Wilsthorpe
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
People typically call us after spotting one of these:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Before you book anyone
- How to care for the finish
- How soon you can use it again
- The length of the guarantee and what it covers
- What prep work is covered
Towns and villages near Wilsthorpe
More services for Wilsthorpe
About our accreditations · Every repair comes with a one-year guarantee.
