East Riding of Yorkshire · England

Bath Re-enamelling for Boynton homes

Damaged bath in Boynton? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Boynton homes

Where we work around Boynton

Boynton is about 3 miles west of Bridlington, in East Riding of Yorkshire. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Boynton is one of 299 towns and villages in East Riding of Yorkshire we cover. Our jobs stretch from Boynton to Leeds (about 56 miles away).

Every address in YO16 is within our area. Nearby, we also work in Easton (1 mile east), Carnaby (2 miles south), Bessingby (2 miles south-east), Haisthorpe (2 miles south) and Hilderthorpe (3 miles south-east). Within a short drive, we also cover Bridlington (3 miles east), Driffield (9 miles south-west), Hornsea (13 miles south), Flamborough (6 miles east), Nafferton (8 miles south-west) and Leven (14 miles south).

Local landmarks in Boynton

Locally, our jobs take us to homes close to Boynton Primary School, Church of St Andrew and Bridlington School and the streets around them. The closest station to Boynton is Bridlington station, about 2.8 miles east of the centre. Other landmarks nearby include Bayle Museum (2.5 miles east) and Bridlington Hospital (2.1 miles east).

Map of Boynton © OpenStreetMap contributors

About our bath re-enamelling in Boynton

Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Typical jobs include a bath in a colour that no longer suits and enamel that’s lost its shine and feels rough, on basins & shower trays, pressed steel baths and cast iron baths.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Area
Boynton (YO16)
Region
East Riding of Yorkshire
Cover
A year, on every repair
Quote
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Aftercare tips

Simple care helps the repair last. Our advice:

  • Wash away dyes and oils after use
  • Get any chip repaired quickly
  • Leave the bath for the full curing time before using it
  • Stick to gentle, non-abrasive cleaners

Wipe the bath dry after use where you can, and rinse away any product left on the surface.

On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.

The process

Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you are happy with the plan. It typically takes the best part of a day, and you’re welcome to carry on with your day while we work.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Have a window or extractor fan available
  • Keep pets and children out of the room while we work
  • Clear the area around the damage

Getting a price

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Get a free quote

Advice

What affects the price in Boynton

Resurfacing from £350. There is no area surcharge for Boynton. The price reflects:

  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out
  • How much damage there is
  • The material and finish

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Send photos for a quote

Photographing the damage takes a minute, and it saves a visit. Please include:

  • Any details about the material
  • A photo taken from further back
  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Common questions in Boynton

Can you price it without visiting?

In nearly every case. If photos do not show enough, we will ask for another angle.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can you change the colour of my bath?

Yes, white is the usual choice. Mention the colour you want when you send pictures.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What does bath re-enamelling cost?

Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

Do the materials smell?

Expect a mild smell while we are working that clears as it cures.

What do you need from me?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

When a repair is not the answer

Before you book, it’s worth knowing the limits:

  • Leaks from fittings rather than the bath
  • Anything hidden under an old coating, until we remove it
  • An acrylic bath that flexes badly underfoot

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Boynton

  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Repairing versus replacing in Boynton

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Colour-matched on site
  • Work done at your home or business
  • Rooms protected and left tidy
  • A year’s guarantee on all work

Read our prices page and bath cost comparison.

Work for landlords and builders

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.