Somerset · England
Bath re-enamelling & resurfacing in Windmill Hill, Somerset
Local bath re-enamelling for Windmill Hill: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
Bath re-enamelling in Windmill Hill, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s thin, worn enamel in places and a bath that stays dull however much you clean it, we can typically put it right, on basins & shower trays, Victorian roll-tops and cast iron baths alike.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Windmill Hill (TA19)
- Area hub
- Somerset
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Windmill Hill
Are there extra charges for Windmill Hill?
We do not add a call-out fee. The fixed price covers the visit and the work.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
How to care for the repair
How the surface is treated afterwards matters:
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
- Do not leave a chip unrepaired
- Keep suction mats out of the bath
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Repairing versus replacing in Windmill Hill
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why Windmill Hill customers choose us
- One-year guarantee on every repair
- One price list for the whole UK
- No need to remove anything
- Colour mixed on the day to match
Take a look at our full price list or guide to resurfacing and replacement costs.
Our work in Windmill Hill
Windmill Hill is about 5 miles north of Chard, in Somerset. Wherever you are in the TA19 postcode area, we carry out the work at your property. Windmill Hill is one of 640 towns and villages in Somerset we cover.
Jobs in TA19 are booked in the same way as anywhere else. That includes homes on Windmill Hill Lane and Wood Road. Other places close to Windmill Hill include Hastings (1 mile south-east), Ashill (1 mile north-east), Broadway Pound (1 mile south), Broadway (1 mile south-east) and Horton (1 mile south-east). Within a short drive, we also cover Taunton (7 miles north-west), Bridgwater (13 miles north), Yeovil (15 miles east), Chard (5 miles south), Wellington (11 miles west) and Crewkerne (9 miles south-east).
Landmarks near Windmill Hill
We visit homes around Church of the Blessed Virgin Mary, The Flying Fish pub and Ashill Community Primary School and the streets around them. A little further out are Chard Community Hospital (5 miles south). Green spaces nearby include Staple Hill and Bishopswood Meadows.
What we’re called out for in Windmill Hill
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
It’s worth getting a quote if you see:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Wear marks under the taps
- A bath that stays dull however much you clean it
What your quote should include
- What the guarantee covers, and for how long
- What aftercare is recommended
- Whether they match the colour on site
- What happens if they find more damage
How it works
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
Ask for a price
Send us a photo of the damage and one of the whole item, with your TA19 postcode, and we’ll come back with a fixed quote.
Read more
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Landlords, agents and businesses in Windmill Hill
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Windmill Hill, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Other services in Windmill Hill
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- What the surface is made of
- The size and number of damaged areas
- Access to the area
- The colour and finish to match
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- What it’s made of, if you know
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- Details of any past repairs
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
