Somerset · England
Bath chip & crack repair in Windmill Hill, Somerset
Problem with your bath in Windmill Hill? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- A chipped rim or side
Bath repair at your home in Windmill Hill
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our technicians work on acrylic, cast iron enamel and roll-top & freestanding, and people most often call us about rust by the waste and overflow and hairline or through cracks in acrylic.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Windmill Hill (TA19)
- County
- Somerset
- Guarantee
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Windmill Hill
- Usually one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
Take a look at our full price list and guide to resurfacing and replacement costs.
How to care for the repair
Simple care helps the repair last. We recommend:
- Don’t leave a fresh chip for long
- Don’t scrub with anything abrasive
- Ensure an acrylic bath is firm underfoot
- Clean with warm water and a mild detergent
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
If you manage property in Windmill Hill, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Other services in Windmill Hill
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a few hours, and you’re welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Get a quote
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
Windmill Hill: your questions answered
Do you cover Windmill Hill?
Yes. We work across the UK and travel to Windmill Hill. Send photos and we’ll quote, or call 0345 017 0787.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
Common problems we fix in Windmill Hill
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
These are the problems we are asked about most:
- Rusty patches near the plughole
- Impact holes in acrylic
- Scratches you can feel with a fingernail
- A kit repair that didn’t last
Questions to ask before you book
- Whether cleaning and preparation are in the price
- How your room will be protected
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
Repairs by material
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Our work in Windmill Hill
Windmill Hill is about 5 miles north of Chard, in Somerset. We travel to homes and businesses in Windmill Hill and nearby villages, so nothing has to leave your home. We work in 640 places across Somerset, from the larger towns to small villages.
We work across the TA19 postcode area. You’ll find streets such as Windmill Hill Lane and Wood Road. Close by, we cover Hastings (1 mile south-east), Ashill (1 mile north-east), Broadway Pound (1 mile south), Broadway (1 mile south-east) and Horton (1 mile south-east). We also work in nearby towns such as Taunton (7 miles north-west), Bridgwater (13 miles north), Yeovil (15 miles east), Chard (5 miles south), Wellington (11 miles west) and Crewkerne (9 miles south-east).
What’s near Windmill Hill
Around Windmill Hill, we work in homes near Church of the Blessed Virgin Mary, The Flying Fish pub and Ashill Community Primary School, among other places. Well-known places in the area include Chard Community Hospital (5 miles south). Open spaces near Windmill Hill include Staple Hill and Bishopswood Meadows.
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- How easy the damage is to reach
- Doing more than one item at once
- The size and number of damaged areas
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
