South Gloucestershire · England
Bath Re-enamelling for Winterbourne Down homes
We travel to Winterbourne Down for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Lots of chips and rust spots
Repair or replace in Winterbourne Down?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Work done at your home or business
- Colour mixed on the day to match
- Same prices wherever you are
- We will tell you if it’s not worth repairing
Take a look at our full price list and bath cost comparison.
Bath re-enamelling in Winterbourne Down without replacing anything
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We are often asked to fix a bath that stays dull however much you clean it and several chips and rust patches, in Victorian roll-tops, acrylic baths and cast iron baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Winterbourne Down (BS36, BS16, BS34)
- County
- South Gloucestershire
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow the best part of a day. Before we go, we’ll explain when it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Read more
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Where we work around Winterbourne Down
Winterbourne Down is about 1 mile east of Stoke Gifford, in South Gloucestershire. Customers in Winterbourne Down get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We work in 110 places in South Gloucestershire, from the larger towns to small villages. Our jobs stretch from Winterbourne Down to Birmingham (about 71 miles away).
All of BS36, BS16 and BS34 is within our area, from the main roads to the quietest streets. Local streets include Mill Road, Dragon Road and Bristol Road, all of which we cover. Other places close to Winterbourne Down include Whiteshill (1 mile south-east), Hambrook (1 mile south), Winterbourne (1 mile north-east), Moorend (1 mile south-east) and Great Stoke (1 mile west). We also work in nearby towns such as Kingswood (5 miles south), Yate (5 miles north-east), Fishponds (3 miles south), Thornbury (7 miles north), Patchway (3 miles west) and Morton (7 miles north).
Around Winterbourne Down
Locally, our jobs take us to homes close to Hambrook Primary School, Crown Inn and Whiteshill Evangelical Church. Also close by are Three Brooks Local Nature Reserve (1.6 miles north-west), South Gloucestershire Hospital Home Teaching Service (1.4 miles south-west) and Winterbourne Academy (0.7 miles north-east). The closest station to Winterbourne Down is Bristol Parkway station, about 1.2 miles west. A little further out are Frenchay Village Museum (1.5 miles south-west) and The Mall (3.5 miles west). For a walk, there is Purdown.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Winterbourne Down. The price reflects:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- Previous DIY repairs that have to come out
Our prices are the same across the UK, so there is no premium for Winterbourne Down. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- Any details about the material
- One picture of the entire bath
- Where you are, by postcode
- Any earlier repairs or coatings
If you’re in Winterbourne Down and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Also near Winterbourne Down
More services for Winterbourne Down
What we can’t put right
It helps to know what we can’t do too:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
We work for landlords, letting agents and housing providers in Winterbourne Down as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Do you need bath re-enamelling in Winterbourne Down?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
If you can see any of these, send us a picture:
- A period or roll-top bath worth keeping
- Wear marks under the taps
- A coloured bath you want in white
- Lots of chips and rust spots
Comparing quotes
- Who will actually do the work
- Is the price fixed, and does it include VAT?
- What prep work is covered
- How to care for the finish
Common questions in Winterbourne Down
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Which areas do you work in?
All of South Gloucestershire, and the rest of the UK. There is no extra charge for travel.
How long is the bath unusable?
Usually one day, with the bath ready the following day. A badly pitted bath can need a second day.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
About our accreditations · Every repair comes with a one-year guarantee.
