South Gloucestershire · England
Bath re-enamelling & resurfacing in Winterbourne, South Gloucestershire
Full bath re-enamelling and resurfacing for homes and businesses in Winterbourne and across South Gloucestershire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Chips and rust in more than one place
- A dull, rough surface that will not come clean
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
What you get with us
- Dust sheets down, tidy finish
- A fixed quote before booking
- No extra charge for your area
- We’ll tell you if it’s not worth repairing
Read our pricing and guide to resurfacing and replacement costs.
Bath re-enamelling in Winterbourne, done in place
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on cast iron baths, pressed steel baths and Victorian roll-tops, and common reasons people contact us are worn patches where water runs and sits and brown or grey marks that don’t clean off.
Every repair comes with a one-year guarantee.
- Location
- Winterbourne (BS36)
- Region
- South Gloucestershire
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Winterbourne
Winterbourne is about 2 miles north of Mangotsfield, in South Gloucestershire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Winterbourne is one of 110 towns and villages in South Gloucestershire where we work. Our nearest city page is Birmingham, about 70 miles away.
We cover every part of the BS36 postcode area and the streets around it. From High Street, Station Road and Church Road or a nearby road, we can come to you. We also cover the places around Winterbourne: Winterbourne Down (1 mile south-west), Whiteshill (1 mile south-west), Moorend (1 mile south), Hambrook (1 mile south-west) and Great Stoke (1 mile west). Larger places within reach include Kingswood (5 miles south), Yate (4 miles north-east), Fishponds (3 miles south-west), Thornbury (6 miles north), Patchway (3 miles west) and Morton (6 miles north).
Local landmarks in Winterbourne
Around Winterbourne, we work in homes near George and Dragon pub, Winterbourne Academy and Three Brooks Local Nature Reserve and the streets around them. Nearby too are St Michael's Church of England Primary School (under half a mile north-west) and Church of All Saints (0.6 miles south). For rail, the closest station is Bristol Parkway station, about 1.9 miles west. Further afield, we also cover the area around Frenchay Village Museum (2.2 miles south-west) and Frenchay Hospital (2 miles south-west). For a walk, there’s Purdown.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a full day, including clearing up.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Winterbourne
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Do you need bath re-enamelling in Winterbourne?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, generally first under the taps and around the waste.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- A roll-top that’s seen better days
Comparing quotes
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- Aftercare advice
- When it can be used again
Landlords, agents and businesses in Winterbourne
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Have chips seen to early
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Winterbourne: your questions answered
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across South Gloucestershire.
Nearby places to Winterbourne
Also in Winterbourne
About our accreditations · Every repair comes with a one-year guarantee.
