Shropshire · England

Bath re-enamelling & resurfacing in Withington, Shropshire

Fixed-price bath re-enamelling in Withington and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • Brown or grey marks that don’t clean off
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Withington

About our bath re-enamelling in Withington

A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with stains that won’t shift and a coating lifting around the plughole, we can help.

Every repair is covered by our one-year guarantee.

Where
Withington (SY4)
County
Shropshire
Warranty
12 months on all our work
Quotes
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

How it works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can normally be used the next day.

How to prepare

  • Tell us about any previous repairs or coatings
  • Plan for the room to be out of bounds to pets and children
  • Point us to the nearest place to park

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.

Get a free quote

Advice

Different materials, different repairs

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Where we work around Withington

Withington is about 5 miles east of Shrewsbury, in Shropshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover all 433 towns and villages across Shropshire, from the larger towns to small villages. Our jobs stretch from Withington to Birmingham (35 miles away).

Postcode districts we cover here: SY4. We also travel to Rodington (1 mile north-east), Somerwood (1 mile north), Rodington Heath (1 mile north-east), Upton Magna (1 mile west) and Roden (2 miles north). Within a short drive, we also cover Shrewsbury (5 miles west), Madeley (9 miles south-east), Bridgnorth (15 miles south-east), Market Drayton (14 miles north-east), Coleham (5 miles west) and Kingsland (5 miles west).

Around Withington

We visit homes around Church of St John the Baptist, among other places. The nearest railway station is Wellington (Shropshire) station, about 4.8 miles east. Other landmarks nearby include Charlton Castle (1.8 miles south-east) and Wroxeter Roman Site And Museum (2.9 miles south). Not far away are Haughmond Hill.

Map of Withington © OpenStreetMap contributors

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

How we price bath re-enamelling

Prices start from £350. You’ll know the full cost before you book. We take into account:

  • Access to the area
  • How much damage there is
  • What kind of damage it is
  • Previous DIY repairs that have to come out

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Quotes from your pictures

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size
  • The material, if you know it
  • A close-up of the damage, in focus

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Should you replace it?

A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, with the bath back in use the day after. Prices start from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Withington

  • We leave the room as we found it
  • We come to you, anywhere in the UK
  • CHAS, Constructionline and SafeContractor accredited
  • Honest advice, even when it means no job

Take a look at our prices page and resurfacing vs replacement cost guide.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • A poorly supported acrylic bath, until it’s firmed up
  • Steel that has corroded right through
  • A bath split right through the body

If in doubt, send pictures and we will say what we think.

What we work on

  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops

How to look after the repair

Nothing complicated is needed, just a few sensible habits:

  • A quick wipe after use keeps limescale away
  • Never use suction bath mats
  • Stick to gentle, non-abrasive cleaners
  • Leave the bath for the full curing time before using it

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Landlords, agents and businesses in Withington

Landlords, letting agents and housing providers in Withington use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Questions from Withington

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you resurface freestanding baths?

Yes. We can do the inside and outside.

What information do you need?

Use the quote form or ring 0345 017 0787, and we’ll take it from there.

Do you need to take the bath out?

Not at all. We work on the bath in place, with the room protected and ventilated.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders in Withington.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.

Is there a guarantee?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Can tenants book a repair?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.