Kent · England
Bath Re-enamelling for Woodnesborough homes
Bath re-enamelling in and around Woodnesborough: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
Bath re-enamelling in Woodnesborough without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for thin, worn enamel in places and an outdated colour you’d like to change, on Victorian roll-tops, cast iron baths and acrylic baths.
All our work comes with a one-year guarantee.
- Location
- Woodnesborough (CT13)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair is not the answer
Some jobs are not right for a repair, for example:
- Steel that has corroded right through
- A bath split right through the body
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Woodnesborough
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Leave the bath for the full curing time before using it
- Have chips seen to early
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Landlords, agents and businesses in Woodnesborough
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Common problems we fix in Woodnesborough
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Keep an eye out for these signs:
- Brown or grey marks that do not clean off
- A coloured bath you want in white
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
Questions to ask before booking
- How to look after the finish
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
Repair or replace in Woodnesborough?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Colours mixed by hand to suit your surface
- A year’s guarantee on all work
- A fixed quote before you book
- No extra charge for your area
See our pricing and bath cost comparison.
Nearby places to Woodnesborough
More services for Woodnesborough
FAQs for Woodnesborough
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we will ask for another angle.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
Get a quote
Upload a photo of the damage and a wider shot of the whole item, and tell us you are in Woodnesborough, and we’ll come back with a fixed quote.
Read more
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Where we work around Woodnesborough
Woodnesborough is about 5 miles north-west of Deal, in Kent. We travel to homes and businesses in Woodnesborough, so you don’t need to take anything anywhere. Woodnesborough is one of 922 towns and villages in Kent we cover. Our jobs stretch from Woodnesborough to London (about 63 miles away).
We work across the CT13 postcode area and the streets around it. From The Street, Elmwood Park and Fir Tree Hill or a nearby road, we can come to you. If you are just outside Woodnesborough, we cover Marshborough (1 mile north-west), Statenborough (1 mile south-east), Felderland (1 mile south-east), East Street (1 mile north) and Eastry (1 mile south). Larger places within reach include Canterbury (10 miles west), Margate (9 miles north), Dover (9 miles south), Folkestone (14 miles south-west), Ramsgate (7 miles north-east) and Broadstairs (9 miles north-east).
What’s near Woodnesborough
Typical jobs here are in homes near Ham Fen, Church of St Mary the Virgin and Sandwich Technology School. Woodnesborough’s nearest station is Sandwich station, roughly 1.5 miles east. Well-known places in the area include Sandown Castle (4.4 miles south-east) and White Mill (1.3 miles north-east). Green spaces nearby include Monk's Wall nature reserve.
About our accreditations · Every repair comes with a one-year guarantee.
