Gloucestershire · England
Bath re-enamelling & resurfacing in Woolaston, Gloucestershire
We travel to Woolaston for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Several chips and rust patches
- An original cast iron bath that needs restoring
Bath re-enamelling in Woolaston, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Our repair technicians work on pressed steel baths, cast iron baths and acrylic baths, and the jobs we see most are several chips and rust patches and a roll-top that’s seen better days.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Location
- Woolaston (GL15)
- Region
- Gloucestershire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Stick to gentle, non-abrasive cleaners
- Don’t let dyes or oils sit on the finish
- Never use suction bath mats
- A quick wipe after use keeps limescale away
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Why repair rather than replace?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
What you get with us
- Free fixed quotes from pictures
- No extra charge for your area
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page or resurfacing vs replacement cost guide.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Your questions about bath re-enamelling in Woolaston
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Are there extra charges for Woolaston?
No. Our quotes include travel, and we charge the same wherever you are.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
How long is the bath unusable?
Usually one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How do I book?
Use the quote form or ring 0345 017 0787.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Woolaston as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How we price bath re-enamelling
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- The material and finish
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- One picture of the whole bath
- The material, if you know it
If you’re in Woolaston and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Our work in Woolaston
Woolaston is about 6 miles north-east of Chepstow, in Gloucestershire. Our technicians come to customers in Woolaston, so nothing has to leave your home. We work in 470 places in Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 61 miles away.
All of GL15 is covered. From Station Road, Severn View Road and Reddings Close or a nearby road, we can come to you. We also travel to Alvington (1 mile east), Aylburton (2 miles north-east), Allaston (3 miles north-east), Brockhollands (3 miles north-east) and Lydney (3 miles north-east). Further out, we also cover Cam (10 miles east), Stonehouse (14 miles east), Dursley (10 miles east), Cinderford (9 miles north-east), Hardwicke (15 miles north-east) and Coleford (7 miles north).
Local landmarks in Woolaston
We visit homes around The Swan pub, Woolaston Primary School and East Wood, among other places. Woolaston’s nearest station is Lydney station, about 2.8 miles east of the centre. A little further out are Lydney Park Museum (2.1 miles north-east) and Chepstow Community Hospital (5.8 miles south-west). Open spaces near Woolaston include Ridley Bottom and Beddick Hill.
What happens on the day
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
Common problems we fix in Woolaston
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
People normally call us after spotting something like this:
- Thin, worn enamel in places
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
What your quote should include
- If travel is included in the price
- Who turns up on the day
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
Other services in Woolaston
When we would advise against a repair
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Leaks from fittings rather than the bath
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Woolaston
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
