North Somerset · England
Bath re-enamelling & resurfacing in Woolvershill Batch, North Somerset
Bath re-enamelling in Woolvershill Batch without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
Bath re-enamelling in Woolvershill Batch, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Typical jobs include an original cast iron bath that needs restoring and a peeling or bubbling previous coating, in cast iron baths, basins & shower trays and acrylic baths.
Every repair is covered by a one-year guarantee.
- Location
- Woolvershill Batch (BS29)
- Area hub
- North Somerset
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Covering Woolvershill Batch
Woolvershill Batch is about 2 miles east of Weston-super-Mare, in North Somerset. Wherever you are in the BS29 postcode area, a technician comes to you. Woolvershill Batch is one of 86 places in North Somerset we cover.
We work across the BS29 postcode area. From Tanner Road, Criddle Avenue and Williams Way or anywhere nearby, we can come to you. Close by, we cover Rolstone (1 mile north-east), East Rolstone (2 miles north-east), Banwell (2 miles south-east), West Hewish (2 miles north-east) and Hewish (2 miles north-east). Larger places within reach include Portishead (11 miles north-east), Clevedon (7 miles north), Nailsea (8 miles north-east), Yatton (4 miles north-east), Oldmixon (3 miles south-west) and Port Marine (12 miles north-east).
Near you in Woolvershill Batch
Our customers here include homes close to Parklands Educate Together Primary, Locking Castle Church and Priory Community School and the streets around them. Other local landmarks include Worle Community School (1.5 miles north-west) and Harvester Weston Gateway pub (0.7 miles north-west). The closest station to Woolvershill Batch is Worle station, about 1 mile north-west of the centre. Well-known places in the area include Locking Castle (0.7 miles west) and Weston General Hospital (3.5 miles south-west). The countryside around Woolvershill Batch includes Worlebury Hill and Blake's Pools.
Landlords, agents and businesses in Woolvershill Batch
We work for landlords, letting agents and housing providers in Woolvershill Batch as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Point us to the nearest place to park
Getting a price
To get a price, send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Common problems we fix in Woolvershill Batch
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The things clients normally mention when they call are:
- Chips and rust in more than one place
- Staining under the taps and around the waste
- An old resurfacing that’s failing
- An outdated colour you’d like to change
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- What aftercare is recommended
- What preparation is included
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Wash away dyes and oils after use
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
- Don’t leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repair or replace in Woolvershill Batch?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Woolvershill Batch customers choose us
- Same prices wherever you are
- Dust sheets down, tidy finish
- A year’s guarantee on all work
- A fixed quote before booking
See our full price list or guide to resurfacing and replacement costs.
What affects the price in Woolvershill Batch
Resurfacing from £350. We charge the same across the UK, including Woolvershill Batch. The price reflects:
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- The colour and finish to match
Our prices are the same across the UK, with no extra for Woolvershill Batch. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- Details of any past repairs
- A wider photo showing the entire bath
- Something in shot to show the size
- The material, if you know it
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
FAQs for Woolvershill Batch
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Also near Woolvershill Batch
Also in Woolvershill Batch
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
