North Somerset · England
Bath Re-enamelling in Rolstone
Problem with your bath in Rolstone? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
Bath re-enamelling in Rolstone, done in place
We do not move the bath, so the taps, tiles and plumbing are not touched. It usually takes one visit, and can be used again the day after. Whether it’s an outdated colour you’d like to change and wear marks under the taps, we can help, whatever the material.
All our work is covered by a one-year guarantee.
- Location
- Rolstone (BS24)
- Area hub
- North Somerset
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Rolstone
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Rolstone. The price comes down to:
- The colour and finish to match
- How many items we do on one visit
- The type of damage
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
We price nearly every job from pictures. This is what we need:
- One picture of the whole bath
- Whether it’s been repaired or coated before
- Any details about the material
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Landlords, agents and businesses in Rolstone
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
For anyone letting property in or around Rolstone, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Towns and villages near Rolstone
Other services in Rolstone
Common problems we fix in Rolstone
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The most common problems we are called about are:
- Thin, worn enamel in places
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
Before you book anyone
- Whether the price covers travel
- A fixed price, and whether VAT is included
- Who will actually do the work
- How the room is protected while they work
Looking after it afterwards
So the finish stays in good condition for years:
- Don’t use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Use washing-up liquid and a soft cloth
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Repairing versus replacing in Rolstone
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.
Why choose Surface Doctor in Rolstone
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- Colour mixed on the day to match
- Work done at your home or business
See our pricing or resurfacing vs replacement cost guide.
Our work in Rolstone
Rolstone is about 3 miles east of Weston-super-Mare, in North Somerset. Wherever you are in the BS24 postcode area, we come to you. We work in all 86 towns and villages across North Somerset.
Here we cover the BS24 postcode area. Other places close to Rolstone include East Rolstone (1 mile south-east), Hewish (1 mile north-east), West Hewish (1 mile north), Puxton (1 mile north-east) and Woolvershill Batch (1 mile south-west). We also work in nearby towns such as Weston-super-Mare (3 miles west), Portishead (10 miles north-east), Clevedon (5 miles north), Nailsea (7 miles north-east), Milton (3 miles west) and Yatton (3 miles north-east).
Local landmarks in Rolstone
Typical jobs here are in homes near St Georges Church School, Woolpack Inn and Priory Community School, among other places. The closest station to Rolstone is Worle station, roughly 1.3 miles west of the centre. Well-known places in the area include Locking Castle (1.8 miles south-west) and Weston General Hospital (4.7 miles south-west). Open spaces near Rolstone include Blake's Pools and Cadbury Hill.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
How to prepare
- Open a window if you can
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
