North Lincolnshire · England
Bath re-enamelling & resurfacing in Wootton, North Lincolnshire
Bath re-enamelling in and around Wootton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Thin, worn enamel in places
Bath re-enamelling at your home in Wootton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair cast iron baths, pressed steel baths and Victorian roll-tops, and the jobs we see most are a bath that stays dull however much you clean it and a coloured bath you want in white.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Wootton (DN39)
- Region
- North Lincolnshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair won’t do:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
About Wootton
Wootton is about 9 miles south of Kingston upon Hull, in North Lincolnshire. We travel to clients in Wootton and the surrounding area, so you don’t need to take anything anywhere. We work in 90 places across North Lincolnshire, from the larger towns to small villages. We work right across the region, from Wootton to Leeds (50 miles away).
Here we cover the DN39 postcode area. You’ll find streets such as High Street, Vicarage Gardens and Sycamore Close, all of which we cover. We also cover the places around Wootton: Thornton Curtis (1 mile north), Ulceby (1 mile south-east), Ulceby Skitter (2 miles east), South End (3 miles north-east) and Barrow upon Humber (3 miles north). Within a short drive, we also cover Scunthorpe (13 miles west), Barton-upon-Humber (5 miles north-west), Bottesford (14 miles south-west), Brigg (8 miles south-west), Frodingham (12 miles west) and Crosby (12 miles west).
Local landmarks in Wootton
Locally, our jobs take us to homes close to Nags Head pub, Church of St Andrew and Wootton St Andrew's CofE Primary School and the streets around them. The nearest railway station is Thornton Abbey station, roughly 2.2 miles north-east of the centre. Nearby you’ll also find Barton upon Humber Castle (4.9 miles north-west).
Towns and villages near Wootton
Also in Wootton
Prices and what affects them
Prices start from £350. Prices are worked out job by job. The main factors are:
- Any earlier repairs that need removing first
- How much damage there is
- The material
- What kind of damage it is
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Details of any past repairs
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
Upload a picture of the damage and one of the whole item, with your DN39 postcode, and we will reply with a fixed price.
When to call us in Wootton
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Signs it’s time to call us include:
- A dull, rough surface that won’t come clean
- Stains that won’t shift
- Thin, worn enamel in places
- An outdated colour you’d like to change
Comparing quotes
- Whether the colour is mixed to match
- How to look after the finish
- When it can be used again
- How changes to the job are handled
Aftercare tips
To keep it looking its best for years:
- Rinse off hair dye, oils and bath bombs straight away
- Respect the curing time we give you
- Keep suction mats out of the bath
- Get any chip repaired quickly
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Questions from Wootton
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Is repairing better than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes a full day, and we will keep you posted as we go.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the following day.
Before we arrive
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
