Derbyshire · England
Bath Re-enamelling for Wyaston homes
Full bath re-enamelling and resurfacing at your home in Wyaston, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our bath re-enamelling in Wyaston
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with wear marks under the taps and a dull, rough surface that won’t come clean, we can help.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Wyaston (DE6)
- Region
- Derbyshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Any earlier repairs that need removing first
- The material and finish
- What kind of damage it is
- How easy the damage is to reach
Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- A wider photo showing the entire bath
- Details of any past repairs
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Do you need bath re-enamelling in Wyaston?
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The things clients typically mention when they call are:
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Several chips and rust patches
What your quote should include
- What aftercare is recommended
- How your room will be protected
- Whether the price covers travel
- What the guarantee covers, and for how long
For landlords and businesses
Landlords, letting agents and housing providers in Wyaston use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
For anyone letting property in or around Wyaston, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
When a repair is not the answer
In fairness, some problems need a different fix:
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
About Wyaston
Wyaston is about 8 miles north-east of Uttoxeter, in Derbyshire. Wherever you are in the DE6 postcode area, we carry out the work at your property. Our technicians cover 532 places in Derbyshire. Our nearest city page is Birmingham, about 36 miles away.
Postcode districts we cover here: DE6. Neighbouring places we cover include Edlaston (1 mile north-west), Yeaveley (1 mile south), Osmaston (1 mile north-east), Anacrehill (2 miles west) and Snelston (2 miles west). Larger places within reach include Swadlincote (15 miles south-east), Belper (11 miles east), Ripley (14 miles east), Matlock (13 miles north-east), Upper Midway (15 miles south-east) and Hilton (8 miles south-east).
Near you in Wyaston
Around Wyaston, we work in homes near The Shire Horse pub and Church of St James, among other places. Well-known places in the area include Hamilton House Toy Museum (2.7 miles north) and Ashbourne Rural District (2.6 miles north).
Places near Wyaston
More services for Wyaston
FAQs for Wyaston
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
What happens next?
We come back with a fixed price, usually with dates to choose from. There is no obligation to book.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How to look after the repair
It’s all simple stuff:
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- Do not use the bath until it has fully cured
- Keep suction mats out of the bath
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes most of the day. We clean up when we are done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Let us know about parking or access
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
