Flintshire · England
Bath re-enamelling & resurfacing in Y Waun, Flintshire
Damaged bath in Y Waun? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Brown or grey marks that don’t clean off
How we handle bath re-enamelling in Y Waun
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. Common call-outs are for a coating lifting around the plughole and lots of chips and rust spots, across basins & shower trays, cast iron baths and Victorian roll-tops.
Every repair comes with our one-year guarantee, wherever you are in Flintshire.
- Where
- Y Waun (CH7)
- County
- Flintshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- A bath that is rusted through
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think.
Materials we work on in Y Waun
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Also in Y Waun
The process
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
- Make sure the room can be ventilated
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Read more
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- The colour and finish to match
- How many items we do on one visit
- The material and finish
- What kind of damage it is
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from pictures
Phone photos are fine. Just ensure we can see:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Common questions in Y Waun
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
How much does bath re-enamelling cost in Y Waun?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your CH7 postcode.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Are there extra charges for Y Waun?
We don’t add a call-out fee. Your fixed price includes everything.
Covering Y Waun
Y Waun (also: Gwernaffield) is about 5 miles west of Bwcle, in Flintshire. We visit homes and businesses in Y Waun and nearby villages, so you do not need to take anything anywhere. Y Waun is one of 139 places in Flintshire where we work. Our nearest city page is Liverpool, about 20 miles away.
Jobs in CH7 are booked in the same way as anywhere else. You will find streets such as Y Waen, Tan-yr-Hafod and Bwlch y Ddeufryn, and we cover them all. We also cover the places around Y Waun: Gwernaffield with Pantymwyn (1 mile north-east), Cadole (1 mile south), Gwernymynydd (1 mile south-east), Rhydymwyn (1 mile north) and Black Brook (2 miles east). Larger places within reach include Connah's Quay (6 miles north-east), Buckley (4 miles east), Bwcle (5 miles east), Flint (5 miles north-east), Saltney (11 miles east) and Holywell (7 miles north).
Landmarks near Y Waun
Typical jobs here are in homes near The Miners Arms, Holy Trinity Church and Alun School. Further afield, we also cover the area around Castell Rhosesmor (2.8 miles north-east) and Mold Library and Museum (2 miles east). Not far away are Cefn Mawr and Moel Dywyll.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Flintshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
For anyone letting property in or around Y Waun, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why us?
- A year’s guarantee on all work
- No extra charge for your area
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
See our full price list and resurfacing vs replacement cost guide.
When to call us in Y Waun
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, normally first under the taps and around the waste.
Clients usually contact us about:
- An original cast iron bath that needs restoring
- Stains that won’t shift
- Lots of chips and rust spots
- An old resurfacing that’s failing
What your quote should include
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
- If travel is included in the price
Looking after it afterwards
After the repair has cured, a few habits help it last:
- A quick wipe after use keeps limescale away
- Keep toiletries on a shelf rather than in the bath
- Get any chip repaired quickly
- Repair dripping taps early
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
