Flintshire · England

Bath re-enamelling & resurfacing in Saltney, Flintshire

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Saltney. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • Stains that will not shift
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Saltney?

Bath re-enamelling in Saltney, done in place

A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We regularly repair cast iron baths, pressed steel baths and acrylic baths, and common reasons people contact us are stains that won’t shift and a coloured bath you want in white.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Where
Saltney (CH4, CH1)
County
Flintshire
Warranty
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Common questions in Saltney

Will the price change on the day?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Can you price it without visiting?

In nearly every case. If pictures don’t show enough, we will ask for another angle.

Does the bath have to be removed?

No, it stays where it is. We work on the bath in place, with the room protected and ventilated.

How long does re-enamelling take?

One day for most baths, ready the next day. We give you timings with the quote.

What does bath re-enamelling cost?

Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.

When a repair isn’t the answer

It helps to know what we cannot do:

  • Plumbing leaks, which need a plumber
  • Damage hidden under a previous coating, until it’s stripped back
  • An acrylic bath that flexes badly underfoot

If in doubt, send pictures and we will say what we think before you book.

Materials we repair

  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths

Aftercare tips

Simple care helps the repair last. We recommend:

  • Keep suction mats out of the bath
  • Rinse off hair dye, oils and bath bombs straight away
  • Keep toiletries on a shelf rather than in the bath
  • Leave the bath for the full curing time before using it

Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Repairing versus replacing in Saltney

A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there is no premium for Saltney. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why book with us

  • Typically one visit, start to finish
  • A year’s guarantee on all work
  • We come to you, anywhere in the UK
  • CHAS and Constructionline accredited

See our full price list or bath cost comparison.

Landlords, agents and businesses in Saltney

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

What bath re-enamelling costs

Prices start from £350. There are no hourly rates or hidden extras. The price depends on:

  • Doing more than one item at once
  • Whether old repairs or coatings need taking off
  • The colour and finish to match
  • What the surface is made of

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

How to get a fixed quote

The better the photos, the more accurate the price. Here’s what we find most useful:

  • Something in shot to show the size
  • Good light, ideally daylight, without flash glare
  • The material, if you know it
  • Any earlier repairs or coatings

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

What we do, step by step

We agree an arrival time beforehand. Once we’re there, the work takes most of the day for most jobs. The room is left tidy.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the following day, the bath is ready.

How to prepare

  • Open a window if you can
  • Plan for the room to be out of bounds to pets and children
  • Mention any parking restrictions or tricky access

Getting a price

If you’re in Saltney and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed quote

Read more

Materials and what they mean for the repair

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Where we work around Saltney

Saltney is about 2 miles south-west of Chester, in Flintshire. We travel to homes and businesses in Saltney and nearby villages, so there’s no workshop to go to. Saltney is one of 139 towns and villages in Flintshire we cover. Our nearest city page is Liverpool, about 16 miles away.

Our visits in CH4 and CH1 work the same way as everywhere else we cover. Whether you live on Oak Road, Bray Road and Howe Road or anywhere nearby, a technician can come to you. Saltney sits on or near the A5104, so getting to you is simple. We also cover the places around Saltney: Lache (1 mile south), Westminster Park (1 mile east), Curzon Park (1 mile east), Abbot's Meads (1 mile north-east) and Saltney (1 mile west). Larger places within reach include Connah's Quay (7 miles west), Buckley (7 miles west), Bwcle (7 miles west), Flint (10 miles north-west), Mold (9 miles west) and Holywell (14 miles north-west). Saltney is among the bigger towns we cover in Flintshire.

What’s near Saltney

Around Saltney, we work in homes near Saltney Wood Memorial C.P. School, St. David's High School and St Mark's Church, among other places. Other local landmarks include Westminster Park (0.6 miles east), The Anchor pub (under half a mile east) and St David's High School (0.7 miles west). For rail, the closest station is Chester station, roughly 2.1 miles north-east of the centre. Well-known places in the area include Countess of Chester Hospital (2.3 miles north-east) and Chester Castle (1.3 miles east).

  • Local facilities include Chester (1.6 miles east)
Map of Saltney © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.