Flintshire · England
Bath re-enamelling & resurfacing in Flint, Flintshire
Local bath re-enamelling for Flint: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- An outdated colour you’d like to change
About our bath re-enamelling in Flint
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We are often asked to fix a coating lifting around the plughole and a roll-top that’s seen better days, in pressed steel baths, acrylic baths and basins & shower trays.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Location
- Flint (CH6)
- Region
- Flintshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Flint
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Flintshire.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How to care for the repair
Nothing complicated is needed:
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
For landlords and businesses
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What a repair cannot fix
A repair is not right for every job, including:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
Materials we work on in Flint
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
What we’re called out for in Flint
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
People typically call us when they notice one of these:
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Comparing quotes
- What preparation is included
- Who will actually do the work
- When it can be used again
- Whether the price is fixed and includes VAT
What affects the price in Flint
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- The size and number of damaged areas
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from pictures
Most quotes are done from photos alone. To make it quick:
- Natural light rather than flash
- A wider photo showing the whole bath
- What it’s made of, if you know
- A clear, close picture of the problem area
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a full day, including clearing up.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Clear the area around the damage
- Tell us if there are stairs or a lift
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Related advice
Also in Flint
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Flint and nearby
Flint (also: Y Fflint) is about 6 miles south of Heswall, in Flintshire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Our technicians cover 139 places across Flintshire. We work right across the region, from Flint to Liverpool (about 14 miles away).
Here we cover the CH6 postcode area. You’ll find streets such as Trelawny Square, New Roskell Square and Old London Road, all of which we cover. You’ll find Flint on the A548 and A5119, so it’s easy for us to reach. Nearby, we also work in Pentre Ffwrndan (1 mile east), Oakenholt (1 mile south-east), Mynydd y Fflint (1 mile south), Nant-bâch (2 miles west) and Bagillt (2 miles north-west). We also work in nearby towns such as Connah's Quay (3 miles south-east), Buckley (5 miles south), Bwcle (6 miles south-east), Saltney (10 miles south-east), Mold (5 miles south) and Holywell (4 miles north-west). Flint is among the bigger towns we cover in Flintshire.
Local landmarks in Flint
In Flint, that means homes near St Mary's R.C. Primary School, Welsh Harp pub and Flint High School and the streets around them. Other local landmarks include Flint High School (under half a mile south-west) and Church of St Mary (0.5 miles north). For rail, the closest station is Flint station, about 0.5 miles north of the centre. A little further out are Cae Mount Fieldname (0.5 miles north-east) and Lluesty Hospital (3.9 miles north-west). Green spaces nearby include Leadbrook and Deeside Nature Reserve.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
