Lincolnshire · England
Bath Re-enamelling in Yarburgh
Full bath re-enamelling and resurfacing for homes and businesses in Yarburgh and across Lincolnshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
FAQs for Yarburgh
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Do you cover Yarburgh?
We do. Technicians travel to Yarburgh from across the region, with no extra charge for travel.
About our bath re-enamelling in Yarburgh
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix chips and rust in more than one place and enamel that’s lost its shine and feels rough, across pressed steel baths, Victorian roll-tops and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Yarburgh (LN11)
- Area hub
- Lincolnshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- What kind of damage it is
- The size and number of damaged areas
- What the surface is made of
- Access to the area
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Most quotes are done from photos alone. To make it quick:
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Natural light rather than flash
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Signs you need bath re-enamelling in Yarburgh
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is typically as strong as ever.
Common reasons people in Yarburgh contact us include:
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Comparing quotes
- How your room will be protected
- Whether there are any call-out or travel charges
- When it can be used again
- How the colour is matched
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Where we work around Yarburgh
Yarburgh is about 4 miles north of Louth, in Lincolnshire. Across the LN11 area, we come to you. Yarburgh is one of 732 places in Lincolnshire we cover. Our jobs stretch from Yarburgh to Leeds (about 70 miles away).
Jobs in LN11 are booked in the same way as anywhere else. From King Street and Engine Lane or a nearby road, we can come to you. Other places close to Yarburgh include North End (1 mile south), Covenham St Mary (1 mile north-west), Alvingham (1 mile south-east), Covenham St Bartholomew (1 mile north-west) and Fotherby (2 miles south-west). Larger places within reach include Louth (4 miles south), New Waltham (8 miles north-west), Mablethorpe (11 miles south-east), Humberston (8 miles north), Sutton on Sea (13 miles south-east) and Market Rasen (15 miles west).
Local landmarks in Yarburgh
Around Yarburgh, we work in homes near St John the Baptist's Church and the streets around them. Further afield, we also cover the area around Louth Museum (3.8 miles south-west) and County Hospital Louth (3.7 miles south-west).
Nearby places to Yarburgh
Also in Yarburgh
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Fixed prices from your pictures
- A year’s guarantee on all work
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or resurfacing vs replacement cost guide.
Landlord and trade work in Yarburgh
We work for landlords, letting agents and housing providers in Yarburgh as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
When we would advise against a repair
We’d rather lose a job than do one that won’t last, so these are the limits:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Do not leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What happens on the day
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the next day.
Getting ready for the visit
- Let us know about parking or access
- Let us know which floor the room is on
- Ensure the room can be ventilated
Getting a price
Most clients in Yarburgh get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
