Lincolnshire · England

Bath Re-enamelling in Utterby

Local bath re-enamelling for Utterby: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Utterby?

Landlord and trade work in Utterby

For anyone letting property in or around Utterby, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.

Housing associations and facilities teams use us for planned and reactive repairs in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Bath re-enamelling in Utterby without replacing anything

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair basins & shower trays, acrylic baths and cast iron baths, and common reasons people contact us are a bath that stays dull however much you clean it and worn patches where water runs and sits.

All our work comes with our one-year guarantee.

Where
Utterby (LN11)
Area hub
Lincolnshire
Warranty
A year, on every repair
Price
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Looking after it afterwards

Once the work has cured, treat it gently:

  • Rinse off hair dye, oils and bath bombs straight away
  • Respect the curing time we give you
  • Clean with a soft cloth and mild detergent
  • Avoid suction-cup mats

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

What happens on the day

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the next day.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Tell us about any previous repairs or coatings
  • Let us know about parking or access

Get a quote

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.

Get a free quote

Read more

DIY kit or professional repair?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

How we price bath re-enamelling

Resurfacing from £350. We charge the same across the UK, including Utterby. What changes the price is:

  • The colour and finish to match
  • Doing more than one item at once
  • Where the damage is and how we get to it
  • What the surface is made of

What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Send pictures for a quote

Good pictures mean an accurate price. Here’s what helps:

  • Details of any past repairs
  • The postcode, so we can plan the visit
  • One picture of the whole bath
  • What it’s made of, if you know

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

What we cannot put right

A repair is not right for every job, including:

  • Holes rusted through the metal
  • Plumbing leaks, which need a plumber
  • A metal bath with a through crack

Not sure? Send pictures and we’ll give you a straight answer before booking.

Surfaces we repair

  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths

When to call us in Utterby

The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.

Customers typically contact us about:

  • Staining under the taps and around the waste
  • A peeling or bubbling previous coating
  • Enamel that is lost its shine and feels rough
  • An original cast iron bath that needs restoring

What your quote should include

  • Is the price fixed, and does it include VAT?
  • What preparation is included
  • When it can be used again
  • What the guarantee covers, and for how long

How to compare quotes

Your questions about bath re-enamelling in Utterby

Does someone need to be in?

We need someone to let us in. You do not need to watch us work.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

Do you need to take the bath out?

No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.

Can a failed resurfacing be redone?

In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.

Do you cover Utterby?

Yes. We cover the whole UK and travel to Utterby and the rest of Lincolnshire. Send pictures and we’ll quote, or call 0345 017 0787.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Can you make a coloured bath white?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.

Utterby and the surrounding area

Utterby is about 4 miles north of Louth, in Lincolnshire. Jobs in Utterby are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our repair technicians cover 732 places across Lincolnshire, from the larger towns to small villages. You can also see our page for Leeds, about 68 miles away.

Jobs in LN11 are booked in the same way as anywhere else. Local streets include Grange Lane, Jacobs Close and Main Road, all of which we cover. Nearby, we also work in Fotherby (1 mile south), Ludborough (2 miles north-west), Covenham St Mary (2 miles east), Covenham St Bartholomew (2 miles north-east) and Fulstow (3 miles north-east). Further out, we also cover Louth (4 miles south), New Waltham (7 miles north), Horncastle (15 miles south), Mablethorpe (13 miles south-east), Humberston (8 miles north) and Sutton on Sea (15 miles south-east).

Local landmarks in Utterby

Around Utterby, we work in homes near Church of St Andrew and the streets around them. Well-known places in the area include Louth Museum (3.9 miles south) and County Hospital Louth (3.7 miles south).

Map of Utterby © OpenStreetMap contributors

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.