Lancashire · England
Bath Re-enamelling for Yealand Storrs homes
Local bath re-enamelling for Yealand Storrs: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A peeling or bubbling previous coating
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, normally one day. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Generally one visit, start to finish
- Colours mixed by hand to suit your surface
- No extra charge for your area
- Honest advice, even when it means no job
Read our pricing and resurfacing vs replacement cost guide.
Bath re-enamelling in Yealand Storrs without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you are dealing with a period or roll-top bath worth keeping and brown or grey marks that don’t clean off, we can help.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Yealand Storrs (LA5)
- Area hub
- Lancashire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Yealand Storrs
Yealand Storrs is about 8 miles north-east of Morecambe, in Lancashire. Anywhere in LA5, we come to you. Yealand Storrs is one of 482 towns and villages in Lancashire where we work. We work right across the region, from Yealand Storrs to Manchester (about 54 miles away).
Postcode districts we cover here: LA5. We also cover the places around Yealand Storrs: Yealand Redmayne (1 mile east), Yealand Conyers (1 mile south-east), Crag Foot (2 miles south-west), Tewitfield (2 miles south-east) and Warton (2 miles south). We also work in nearby towns such as Lancaster (9 miles south), Morecambe (8 miles south-west), Heysham (10 miles south-west), Westfield War Memorial Village (9 miles south), Sandylands (9 miles south-west) and Carnforth (4 miles south).
Near you in Yealand Storrs
Locally, our jobs take us to homes close to St John the Evangelist's Church, New Inn and Yealand Church of England Primary School, among other places. Yealand Storrs’s nearest station is Silverdale station, about 1.4 miles south-west of the centre. Further afield, we also cover the area around Mourholme (2.6 miles south-east). Open spaces near Yealand Storrs include Hawes Water and Leighton Moss RSPB reserve.
For landlords and businesses
We work for landlords, letting agents and housing providers in Yealand Storrs as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams in Lancashire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Do you need bath re-enamelling in Yealand Storrs?
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
The most common problems we’re called about are:
- An old resurfacing that’s failing
- Wear marks under the taps
- An outdated colour you’d like to change
- Stains that won’t shift
Questions to ask before booking
- Whether they match the colour on site
- How to care for the finish
- Is the price fixed, and does it include VAT?
- What prep work is covered
Nearby places to Yealand Storrs
Also in Yealand Storrs
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes most of the day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you are under no obligation.
Related advice
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
- Avoid suction-cup mats
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:
- How many areas need work
- How many items we do on one visit
- Unusual colours or finishes
- The material
We charge the same wherever you are, so there is no premium for Yealand Storrs. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send photos for a quote
Before you send photos, these tips help us give you a firm price:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- The material, if you know it
- Daylight if possible, and no flash reflection
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Your questions about bath re-enamelling in Yealand Storrs
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover Yealand Storrs?
Yes, we do. Technicians travel to Yealand Storrs from across the region, with no extra charge for travel.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
