Devon · England
Bath re-enamelling & resurfacing in Yondercott, Devon
Full bath re-enamelling and resurfacing for homes and businesses in Yondercott and across Devon. Send pictures for a free, fixed quote.
- Resurfacing from £350
- An outdated colour you’d like to change
- Worn patches where water runs and sits
Our work in Yondercott
Yondercott is about 7 miles south-west of Wellington, in Devon. Whether you’re in the middle of Yondercott or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Yondercott is one of 586 towns and villages in Devon where we work.
Postcode districts we cover here: EX15. We also travel to Uffculme (1 mile west), Appledore (1 mile north-west), Great Fossend (3 miles north), Sampford Peverell (3 miles north-west) and Westleigh (3 miles north). Within a short drive, we also cover Exeter (15 miles south-west), Tiverton (7 miles west), Sidmouth (15 miles south), Honiton (9 miles south-east), Polsloe (15 miles south-west) and Cullompton (5 miles south-west).
What’s near Yondercott
Around Yondercott, we work in homes near Uffculme Primary School, The Ostler Public House and Parish Church of St Mary, among other places. For rail, the closest station is Tiverton Parkway station, about 2 miles north-west.
Bath re-enamelling in Yondercott, done in place
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We are frequently asked to fix a dull, rough surface that won’t come clean and an old resurfacing that’s failing, in acrylic baths, cast iron baths and Victorian roll-tops.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Yondercott (EX15)
- Area hub
- Devon
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Yondercott
What else we do in Yondercott
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Yondercott
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.
What you get with us
- Everything repaired in place
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
See our pricing and bath cost comparison.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Yondercott: your questions answered
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Which areas do you work in?
We cover the whole UK, including Yondercott and the rest of Devon. Send your postcode with your pictures and we’ll offer you dates.
Do you cover Yondercott?
Yes. We cover the whole UK and come to Yondercott. Send pictures and we’ll quote, or call 0345 017 0787.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- Previous DIY repairs that have to come out
- How many items we do on one visit
- Access to the area
- What kind of damage it is
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- One picture of the whole bath
- Something in shot to show the size
- One sharp close-up of the damage
- The postcode, so we can plan the visit
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.
Landlord and trade work in Yondercott
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What we do, step by step
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Get a quote
Most customers in Yondercott get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
