Vale of Glamorgan · Wales

Bath chip & crack repair in Aberthin, Vale of Glamorgan

Bath repair in Aberthin without the cost of replacing. Get a fixed quote from your pictures, then we come to you.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • A failed DIY repair that’s discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Aberthin

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

How we handle bath repair in Aberthin

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Common call-outs are for rust by the waste and overflow and chips under the taps, across whirlpool & spa baths, acrylic and cast iron enamel.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Location
Aberthin (CF71)
Area hub
Vale of Glamorgan
Warranty
A year, on every repair
Quotes
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

What we can’t put right

In fairness, some problems need a different fix:

  • Wear across the entire surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath
  • Cracks in acrylic we can’t reach from underneath

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel

Aberthin and nearby

Aberthin is about 7 miles south-east of Bridgend, in the Vale of Glamorgan. Across the CF71 area, a technician comes to you. Aberthin is one of 67 towns and villages in the Vale of Glamorgan where we work.

Jobs in CF71 work the same way as everywhere else we cover. That includes homes on Pen-y-Lan Road, Llanquian Road and Court Close and the roads around them. We also cover the places around Aberthin: Cowbridge with Llanblethian (1 mile south-west), East Village (1 mile south-west), Cowbridge (1 mile west), West Village (1 mile west) and Ystradowen (2 miles north). Further out, we also cover Barry (8 miles south-east), Penarth (11 miles east), Gibbonsdown (8 miles south-east), Cadoxton (8 miles south-east), Dinas Powys (9 miles east) and Llantwit Major (5 miles south-west).

Near you in Aberthin

Around Aberthin, we work in homes near The Hare and Hounds pub, Cowbridge Comprehensive School and Church of the Holy Cross and the streets around them. Aberthin’s nearest station is Pontyclun station, roughly 4.2 miles north. A little further out are Royal Glamorgan Hospital (5.7 miles north) and Cowbridge and District Museum (1 mile west). Open spaces near Aberthin include Nant Dyfrgi Pool and Bryn Owen.

Map of Aberthin © OpenStreetMap contributors

What bath repair costs

Prices start from £95. We do not charge extra for travel to Aberthin. The price depends on:

  • The size and number of damaged areas
  • Any earlier repairs that need removing first
  • How many items we do on one visit
  • Where the damage is and how we get to it

The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.

Send photos for a quote

Before you send pictures, a few simple things make all the difference:

  • One picture of the entire bath
  • A clear, close picture of the problem area
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.

What we do, step by step

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours, depending on the damage. We clean up when we are done and tell you when it’s ready to use.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, typically the day after.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Make sure the room can be ventilated
  • Have somewhere for us to park nearby if possible

Get a quote

Send us pictures of the damage and one of the entire item, with your CF71 postcode, and we’ll reply with a fixed quote.

Send pictures for a quote

Related advice

Repair or replace in Aberthin?

Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why Aberthin customers choose us

  • Colours mixed by hand to suit your surface
  • One visit for most repairs
  • We come to you, anywhere in the UK
  • Fixed prices from your photos

See our pricing or bath cost comparison.

FAQs for Aberthin

Can you match an avocado or pink bath?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

Is a cracked acrylic bath repairable?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

Can you repair a failed DIY repair?

Regularly. We strip it out, deal with any rust and repair it again.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Landlord and trade work in Aberthin

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.

What your bath is made of matters

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Put a towel in the bath if you are working above it
  • Have new chips seen to early
  • Stick to mild cleaners and a soft cloth
  • Check that an acrylic bath does not move when you stand in it

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.

Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.