Argyll and Bute · Scotland

Bath chip & crack repair in Achnacroish, Argyll and Bute

We travel to Achnacroish for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Impact holes in acrylic
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Achnacroish?

Bath repair at your home in Achnacroish

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Typical jobs include rusty patches near the plughole and a kit repair that didn’t last, across whirlpool & spa baths, roll-top & freestanding and cast iron enamel.

Big or small, it’s backed by a one-year guarantee in Achnacroish and across Argyll and Bute.

Before and after: a damaged acrylic bath corner repaired in place
Location
Achnacroish (PA34)
Area hub
Argyll and Bute
Cover
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Common questions in Achnacroish

What information do you need?

Use the quote form or ring 0345 017 0787.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Can you repair a failed DIY repair?

Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.

Is there a guarantee?

Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.

How long does the repair take to cure?

Most baths can be used the day after. We will tell you the exact curing time when we finish.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Do you work in Achnacroish?

We do. We send a technician to Achnacroish for every job, and the price is the same as everywhere else.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

About Achnacroish

Achnacroish is in Argyll and Bute. Whether you’re in the middle of Achnacroish or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 118 towns and villages across Argyll and Bute, from the larger towns to small villages. We work right across the region, from Achnacroish to Glasgow (about 65 miles away).

Here we cover the PA34 postcode area. Close by, we cover Balliveolan (1 mile north), Benderloch (4 miles east), Port Appin (5 miles north-east), Dunbeg (5 miles south-east) and North Connel (5 miles south-east). Some remote addresses need extra planning, so it’s best to call first.

Around Achnacroish

Nearby you will also find Coeffin (1.8 miles north) and Lismore Gaelic Heritage Centre (1.3 miles north). The countryside around Achnacroish includes Loch Fiart and Barr Mòr.

Map of Achnacroish © OpenStreetMap contributors

Landlord and trade work in Achnacroish

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

If you manage property in Achnacroish, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.

The process

We work cleanly and quietly. Protection goes down first, then the job itself takes a few hours. Before we leave, we explain the curing time and the aftercare.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Tell us about parking, stairs or access
  • Have somewhere for us to park nearby if possible

How to get a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Advice

What affects the price in Achnacroish

Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:

  • Whether old repairs or coatings need taking off
  • How hard the colour is to match
  • What the surface is made of
  • How easy the damage is to reach

A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.

Send photos for a quote

You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:

  • Daylight if possible, and no flash reflection
  • A close-up of the damage, in focus
  • Any details about the material
  • Details of any past repairs

Most customers in Achnacroish get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

How to care for the repair

Good habits make a big difference to how long a repair lasts:

  • Don’t leave razors or cans standing in the bath
  • Do not leave a fresh chip for long
  • Check that an acrylic bath doesn’t move when you stand in it
  • Avoid scourers, wire wool and gritty cream cleaners

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.

When a repair is not the answer

A repair is not always the answer, and we will tell you before we start. We can’t fix:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Metal that has corroded all the way through
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Send us photos and we will tell you honestly.

Materials we repair

  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths

Different materials, different repairs

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

Repairing versus replacing in Achnacroish

People frequently assume a cracked or chipped bath has to come out. Normally it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.

Why book with us

  • Same prices wherever you are
  • We leave the room as we found it
  • A year’s guarantee on all work
  • Colours mixed by hand to suit your surface

Take a look at our pricing and guide to resurfacing and replacement costs.

When to call us in Achnacroish

A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.

Clients usually contact us about:

  • Holes from dropped items
  • Hairline or through cracks in acrylic
  • Damage done while the bathroom was being fitted
  • A failed DIY repair that is discoloured or lifting

Before booking anyone

  • How long it needs to cure
  • How to care for the finish
  • What prep work is covered
  • Whether the colour is mixed to match

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.