Kent · England
Bath chip & crack repair in Acol, Kent
Bath repair in and around Acol: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A chip where the taps sit
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Bath repair in Acol without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. We are often asked to fix cracks in an acrylic bath and damage beneath the taps, in cast iron enamel, roll-top & freestanding and pressed steel enamel.
A one-year guarantee comes as standard.
- Where
- Acol (CT7)
- County
- Kent
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- Do not scrub with anything abrasive
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
- Put a towel in the bath if you are working above it
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair will not do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
Send us photos and we will tell you honestly.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Repair or replace in Acol?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- Colour mixed on the day to match
- Technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- Free fixed quotes from pictures
Read our full price list or resurfacing vs replacement cost guide.
Our work in Acol
Acol is about 4 miles south-west of Margate, in Kent. We travel to clients in Acol and the surrounding area, so there’s no workshop to go to. Acol is one of 922 places in Kent where we work. Our jobs stretch from Acol to London (61 miles away).
Our repair technicians cover all of the CT7 postcode area and the streets around it. We regularly work on streets such as The Street, Dilnot Lane and Margate Hill. Neighbouring places we cover include Mount Pleasant (1 mile south), Birchington (1 mile north), Way (1 mile south-east), Minster (2 miles south) and Westgate-on-Sea (2 miles north-east). We also work in nearby towns such as Canterbury (11 miles south-west), Margate (4 miles north-east), Dover (15 miles south), Ramsgate (4 miles east), Broadstairs (5 miles east) and Whitstable (12 miles west).
What’s near Acol
Around Acol, we work in homes near Birchington Church of England Primary School, Crown & Sceptre pub and King Ethelbert School. Acol’s nearest station is Birchington-On-Sea station, roughly 1.5 miles north. A little further out are Powell-Cotton Museum (0.7 miles north) and Westwood Cross (3.6 miles east). Not far away are Sandwich and Pegwell Bay.
- Local facilities include Margate West (2.4 miles north-east)
Towns and villages near Acol
Also in Acol
Landlords, agents and businesses in Acol
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Common questions in Acol
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Are there extra charges for Acol?
No. Our quotes include travel, with the same prices everywhere we work.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
What affects the price in Acol
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- Any details about the material
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It generally takes a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
