Kent · England
Bath chip & crack repair in Margate, Kent
Damaged bath in Margate? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- Snagging damage from a refit
What bath repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- The type of damage
- The colour and finish to match
- What the surface is made of
- The size and number of damaged areas
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- Details of any past repairs
- One sharp close-up of the damage
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Bath repair at your home in Margate
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. Common call-outs are for a hole punched through by something heavy and a kit repair that didn’t last, in pressed steel enamel, cast iron enamel and roll-top & freestanding.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
What else we do in Margate
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If we find something your photos didn’t show, we will explain it before carrying on.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the following day.
How to prepare
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
When to call us in Margate
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Look out for these signs:
- Rust by the waste and overflow
- Deep scratches in acrylic
- A failed DIY repair that is discoloured or lifting
- Chips on the rim or sides
Questions to ask before you book
- Who turns up on the day
- How long it needs to cure
- What aftercare is recommended
- How changes to the job are handled
Why repair rather than replace?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why book with us
- Repair technicians who travel to you, UK-wide
- Every repair guaranteed for a year
- Honest advice, even when it means no job
- Colour-matched on site
Read our prices page or bath cost comparison.
When a repair isn’t the answer
Before you book, it’s worth knowing the limits too:
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we will tell you honestly.
Materials we work on in Margate
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Our work in Margate
Margate is in Kent. Customers in Margate get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Our technicians cover 922 places in Kent. You can also see our page for London, about 64 miles away.
Here we cover the CT9, CT7, CT8 and CT10 postcode area. We regularly work on streets such as Yoakley Square, Church Road and High Street and the roads around them. You will find Margate on the A28 and A254, which makes it straightforward to reach. Nearby, we also work in Westwood (1 mile south), Westbrook (1 mile west), Garlinge (1 mile west), Flete (1 mile south-west) and Haine (2 miles south). Larger places within reach include Canterbury (15 miles south-west), Ramsgate (3 miles south), Whitstable (15 miles west), Deal (11 miles south), Herne Bay (11 miles west) and Walmer (12 miles south). Margate is one of the larger places we cover in Kent.
Landmarks near Margate
Around Margate, we work in homes near Parish Church of St John the Baptist, Salmestone Primary School and Hartsdown Academy, among other places. The closest station to Margate is Margate station, about 0.6 miles north-west of the centre. Further afield, we also cover the area around Margate West (1.5 miles west) and Westwood Cross (1.6 miles south). Not far away are Sandwich and Pegwell Bay.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Your questions about bath repair in Margate
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you cover Margate?
Yes. We work across the UK and come to Margate. Send us photos for a fixed quote, or call 0345 017 0787.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
About our accreditations · Every repair comes with a one-year guarantee.
