Flintshire · England

Bath Repair in Alltami

Bath repair for Alltami, without a refit. Get a fixed quote from your photos, then we come to you.

  • Repairs from £95
  • Deep scratches in acrylic
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Alltami

Bath repair in Alltami without replacing anything

Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. Common call-outs are for an old repair that has yellowed or come loose and a hole punched through by something heavy, in acrylic, roll-top & freestanding and whirlpool & spa baths.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Alltami (CH7)
County
Flintshire
Warranty
One year on every repair
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

Repairing versus replacing in Alltami

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Alltami. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why us?

  • Rooms protected and left tidy
  • One visit for most repairs
  • Free fixed quotes from pictures
  • Straight answers about what a repair can do

Read our full price list and bath cost comparison.

What your bath is made of matters

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

What we do, step by step

The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the work takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We apply the finish coats and polish the repair so it blends in.
  5. We leave it to cure; you can usually use the bath the day after.

Preparing for the visit

  • Have a window or extractor fan available
  • Have somewhere for us to park nearby if possible
  • Clear the area around the damage

How to get a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Get a fixed price

Related advice

What bath repair costs

Repairs from £95. Every quote is fixed and free. What we take into account:

  • Unusual colours or finishes
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out
  • The material and finish

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.

Send pictures for a quote

Good photos mean an accurate price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • Where you are, by postcode
  • A wider photo showing the entire bath
  • A coin or ruler next to the damage for scale

For a price in Alltami, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Alltami: your questions answered

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

How do I book?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Do you cover the whole of Flintshire?

We cover the whole UK, including Alltami and the rest of Flintshire. Just include your postcode and we will offer you dates.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders across Flintshire.

How long before I can use the bath?

Normally by the following day, depending on the repair.

Common problems we fix in Alltami

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.

Look out for any of the following:

  • Deep scratches in acrylic
  • Rust spots around the plughole
  • Holes from dropped items
  • Snagging damage from a refit

Before booking anyone

  • A fixed quote, and whether VAT is included
  • How your room will be protected
  • What preparation is included
  • Who will actually do the work

10 questions to ask before booking

What a repair can’t fix

We’d rather lose a job than do one that will not last, so these are the limits:

  • A bath that moves underfoot, until its support is fixed
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Metal that has corroded all the way through

Send us pictures and we will tell you honestly.

Materials we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel

Alltami and the surrounding area

Alltami is about 1 mile north-west of Bwcle, in Flintshire. Customers in Alltami get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Alltami is one of 139 towns and villages in Flintshire where we work. We work right across the region, from Alltami to Liverpool (about 17 miles away).

All of CH7 is within our area. Whether you live on Alltami Road and Bryn Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Buckley Mountain (1 mile south-east), Buckley (1 mile south-east), The Square (1 mile south), Bistre (1 mile south) and Bwcle (1 mile south-east). Larger places within reach include Connah's Quay (3 miles north-east), Flint (5 miles north), Saltney (7 miles east), Holywell (9 miles north-west), Lache (7 miles east) and Higher Shotton (3 miles north-east).

Near you in Alltami

Locally, our jobs take us to homes close to Emmanuel Church, The Tavern and Argoed High School, among other places. Also close by are Etna Park (1 mile east) and Buckley Southdown C.P. (0.6 miles south). Alltami’s nearest station is Buckley station, roughly 1.9 miles south-east of the centre. Further afield, we also cover the area around Mold Community Hospital (2.3 miles west) and Tyddyn Mount (1.5 miles south-west). The countryside around Alltami includes Padeswood Pool and Prenbrigog.

Map of Alltami © OpenStreetMap contributors

Keeping it looking good

So the finish stays in good condition:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • If an acrylic bath flexes, have its feet adjusted
  • Put a towel in the bath if you are working above it
  • Rinse the bath after use, especially in hard water areas

Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.