Northumberland · England
Bath Repair in Annitsford
Chip and crack repairs to enamel, acrylic and cast iron baths in Annitsford, carried out at your home and guaranteed for a year.
- Repairs from £95
- Holes from dropped items
- Snagging damage from a refit
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we look at:
- Whether old repairs or coatings need taking off
- How much damage there is
- The type of damage
- Unusual colours or finishes
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- A photo taken from further back
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- Natural light rather than flash
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Bath repair in Annitsford without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on whirlpool & spa baths, pressed steel enamel and cast iron enamel, and common reasons people contact us are rusty patches near the plughole and chips under the taps.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Annitsford (NE23)
- Region
- Northumberland
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Should you replace it?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there is no premium for Annitsford. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Work done at your home or business
- Colour mixed on the day to match
- Everything repaired in place
- One visit for most repairs
Read our full price list and bath cost comparison.
Also near Annitsford
Also in Annitsford
Annitsford and the surrounding area
Annitsford is about 2 miles north of Killingworth, in Northumberland. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Annitsford is one of 189 towns and villages in Northumberland we cover.
All of NE23 is covered, from the main roads to the quietest streets. That includes homes on Love Avenue, Hudson Avenue and Burradon Road. Nearby, we also work in Dudley (1 mile south-west), Burradon (1 mile south), Seghill (1 mile east), Camperdown (1 mile south) and Killingworth (2 miles south). We also work in nearby towns such as Blyth (5 miles north-east), Ashington (8 miles north), Morpeth (8 miles north-west), Bedlington (5 miles north), Prudhoe (13 miles south-west) and Newsham (4 miles north-east).
Local landmarks in Annitsford
We visit homes around Bridge pub, Church of St John the Baptist and Fordley Primary School. You’ll also find Cramlington Learning Village (1.3 miles north-west) and Stonelaw Middle School (1.2 miles north-west). The closest station to Annitsford is Seaton Delaval station, about 1.9 miles north-east of the centre. A little further out are Seaton Valley Urban District (1.8 miles north-east) and Northumbria Specialist Emergency Care Hospital (1.1 miles north). Open spaces near Annitsford include Big Waters and Bent Hill.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Aftercare tips
After the repair has cured, a few habits help it last:
- Get any new chip repaired before it rusts
- Check that an acrylic bath doesn’t move when you stand in it
- Do not leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes two to three hours for most chips. If we find something your photos didn’t show, we will explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Common questions in Annitsford
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first.
How much does bath repair cost in Annitsford?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
What we can’t put right
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think.
Materials we work on in Annitsford
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
