Newcastle upon Tyne · England

Bath chip & crack repair in Camperdown, Newcastle upon Tyne

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Camperdown, with a one-year guarantee on every repair.

  • Repairs from £95
  • Rust spots around the plughole
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Camperdown

Our work in Camperdown

Camperdown is about 2 miles north of Longbenton, in Newcastle upon Tyne. Whether you’re in the middle of Camperdown or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Camperdown is one of 63 towns and villages in Newcastle upon Tyne where we work.

All of NE12 and NE23 is covered. Jobs here include addresses on Reed Avenue, Station Road and Paddock Lane and the roads around them. Being close to the A1056, Camperdown is easy for our technicians to reach. We also travel to Killingworth (1 mile south-east), Burradon (1 mile north-east), Killingworth Village (1 mile south-east), Northumberland Park (1 mile south-east) and Dudley (1 mile north). Larger places within reach include Newcastle upon Tyne (4 miles south-west), Bensham (6 miles south), Carr Hill (7 miles south), Denton (6 miles south-west), Slatyford (5 miles south-west) and Low Fell (8 miles south).

Landmarks near Camperdown

Our customers here include homes close to Church of the Good Shepherd, Gosforth Park and Burradon Community Primary School, among other places. Camperdown’s nearest station is Northumberland Park (Tyne and Wear) station, roughly 2.4 miles east. Well-known places in the area include Longbenton Urban District (1.6 miles south) and Northumbria Specialist Emergency Care Hospital (2.2 miles north). Not far away are Big Waters and Bent Hill.

Map of Camperdown © OpenStreetMap contributors

About our bath repair in Camperdown

Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We work on roll-top & freestanding, acrylic and cast iron enamel, and common reasons people get in touch are chips along the edge of the bath and rusty patches near the plughole.

Every job is backed for twelve months in Camperdown and everywhere else. We return to put right any problem with the work.

Area
Camperdown (NE12, NE23)
Region
Newcastle upon Tyne
Warranty
12 months on all our work
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Common questions in Camperdown

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is a bath repair permanent?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

How invisible is a bath repair?

We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is a repair better than a new one?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

What happens once I’ve sent pictures?

We review the photos and send a fixed quote with dates.

Prices and what affects them

Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:

  • Unusual colours or finishes
  • How many items we do on one visit
  • Whether old repairs or coatings need taking off
  • How many areas need work

Our prices are the same across the UK, with no extra for Camperdown. The job itself decides the price: how much damage, what it’s made of and how many items.

Getting a price from photos

Good photos mean an accurate price. Here’s what we find most useful:

  • A picture taken from further back
  • Where you are, by postcode
  • A coin or ruler next to the damage for scale
  • Natural light rather than flash

The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.

Do you need bath repair in Camperdown?

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

Typical reasons for a call-out include:

  • Deep scratches in acrylic
  • Chips along the edge of the bath
  • Rust spots around the plughole
  • A cracked acrylic bath

Questions to ask before booking

  • How changes to the job are handled
  • When it can be used again
  • How the colour is matched
  • Whether a trained technician does the job

10 questions to ask before booking

Looking after it afterwards

So the finish stays in good condition for years:

  • Put a towel in the bath if you are working above it
  • Give the bath a quick rinse after use
  • Keep metal cans and razors off the surface
  • Get any new chip repaired before it rusts

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.

Why repair rather than replace?

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.

Why Camperdown customers choose us

  • One price list for the entire UK
  • Colour-matched on site
  • A year’s guarantee on all work
  • Dust sheets down, tidy finish

Read our pricing and resurfacing vs replacement cost guide.

What happens on the day

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We clean up when we are done and let you know when you can use it again.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Keep a parking space free if you can
  • Mention if the room is upstairs or in a flat

Get a quote

Most customers in Camperdown get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a free quote

Read more

When we would advise against a repair

Some jobs aren’t right for a repair, including:

  • Metal that has corroded all the way through
  • A bath that moves underfoot, until its support is fixed
  • Wear across the entire surface, which needs re-enamelling

Send us photos and we’ll tell you honestly before you book.

What we work on

  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.