North Tyneside · England
Bath Repair for Killingworth Village homes
Bath repair in and around Killingworth Village: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A chipped rim or side
- A hole punched through by something heavy
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse it down after each bath
- If an acrylic bath flexes, have its feet adjusted
There is nothing special to do after a repair. Skip bleach and gritty creams and give it a rinse after each bath.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Bath repair in Killingworth Village, done in place
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We are often asked to fix a kit repair that didn’t last and damage beneath the taps, on roll-top & freestanding, acrylic and cast iron enamel.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Killingworth Village (NE12, NE27)
- Region
- North Tyneside
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Killingworth Village
Other services in Killingworth Village
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What happens on the day
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Killingworth Village as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
What affects the price in Killingworth Village
Prices start from £95. There’s no charge for travel to Killingworth Village. The price comes down to:
- Previous DIY repairs that have to come out
- How many items we do on one visit
- The material
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- Natural light rather than flash
- Any details about the material
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
To get a price, send a couple of pictures through our quote form or call us. We will say straight away if a repair is the right fix.
Covering Killingworth Village
Killingworth Village is about 1 mile south-east of Killingworth, in North Tyneside. Clients in Killingworth Village get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Our technicians cover 30 places across North Tyneside.
Here we cover the NE12 and NE27 postcode area. Local streets include West Lane, Green Lane and Broomlee Road, all of which we cover. Close by, we cover Northumberland Park (1 mile south), Killingworth (1 mile north-west), Camperdown (1 mile north-west), Burradon (1 mile north) and Longbenton (1 mile south). Further out, we also cover Tynemouth (5 miles east), Wallsend (3 miles south-east), Whitley Bay (4 miles east), North Shields (5 miles east), Cullercoats (5 miles east) and Chirton (4 miles south-east).
Local landmarks in Killingworth Village
Around Killingworth Village, we work in homes near Amberley Primary School, Gosforth Park and Church of St John the Evangelist, among other places. The nearest railway station is Northumberland Park (Tyne and Wear) station, about 1.9 miles east of the centre. A little further out are Stephenson Railway Museum (3 miles south-east) and Silverlink Shopping Park (3.3 miles south-east). Not far away are Bent Hill and Big Waters.
- Local facilities include Longbenton Urban District (1 mile south)
Common questions in Killingworth Village
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.
Which areas do you work in?
All of North Tyneside, and the rest of the UK. There’s no extra charge for travel.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
When can I have a bath again?
Generally within a day, depending on the repair.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
How invisible is a bath repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why Killingworth Village customers choose us
- One price list for the entire UK
- Most jobs done in one visit
- Honest advice, even when it means no job
- Rooms protected and left tidy
See our full price list and bath cost comparison.
Honest limits
A repair isn’t right for every job, including:
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
