Angus · Scotland
Bath chip & crack repair in Arbroath, Angus
Bath repair for Arbroath, without a refit. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- Rust by the waste and overflow
- Scratches you can feel with a fingernail

How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Clean with warm water and a mild detergent
- Ensure an acrylic bath is firm underfoot
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Bath repair in Arbroath, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for a failed DIY repair that’s discoloured or lifting and deep scratches in acrylic, in pressed steel enamel, roll-top & freestanding and acrylic.
Every job is backed for twelve months in Arbroath and everywhere else. If something goes wrong with the work, we come back.
- Area
- Arbroath (DD11)
- County
- Angus
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026

Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What affects the price in Arbroath
Repairs from £95. Each job gets its own fixed quote. This is what makes a difference:
- How many items we do on one visit
- How hard the colour is to match
- How many areas need work
- Whether old repairs or coatings need taking off
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- A photo taken from further back
- Any details about the material
- Details of any past repairs
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
About Arbroath
Arbroath is about 16 miles north-east of Dundee, in Angus. Wherever you are in the DD11 postcode area, we carry out the work at your property. We cover all 40 towns and villages in Angus. Our nearest city page is Edinburgh, about 49 miles away.
Our visits in DD11 work the same way as everywhere else we cover. That includes homes on Fergus Square, High Street and Cairnie Street. Arbroath sits on or near the A92 and A933, so getting to you is simple. Neighbouring places we cover include St Vigeans (1 mile north), Colliston (3 miles north-west), Auchmithie (3 miles north-east), Balmirmer (4 miles south-west) and East Haven (4 miles south-west). Within a short drive, we also cover Forfar (13 miles north-west), Carnoustie (6 miles south-west), Brechin (12 miles north), Hunter's Town (7 miles south-west), Gardynebourg (7 miles south-west) and West Haven (6 miles south-west). As one of the bigger places in Angus, Arbroath sees plenty of our work.
Local landmarks in Arbroath
Around Arbroath, we work in homes near Arbroath High School, Knox's Church and The Corn Exchange pub, among other places. There is a railway station in Arbroath itself: Arbroath station. Well-known places in the area include Arbroath Signal Tower Museum (0.6 miles south) and Arbroath Infirmary (0.6 miles south).
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours, depending on the damage. If we find something your photos didn’t show, we will explain it before carrying on.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Open a window if you can
- Have somewhere for us to park nearby if possible
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
Arbroath questions
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you quote from photos?
Nearly always. If photos don’t show enough, we will ask for another angle.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Repairing versus replacing in Arbroath
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Arbroath
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
- We’ll tell you if it’s not worth repairing
- Typically one visit, start to finish
Read our full price list or bath cost comparison.
Places near Arbroath
Other services in Arbroath
When a repair is not the answer
We will not take on work that won’t last, so these are the limits:
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
- Metal that has corroded all the way through
Send us photos and we will tell you honestly before booking.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.

