Angus · Scotland
Bath Repair for East Haven homes
Chip and crack repairs to enamel, acrylic and cast iron baths in East Haven, carried out at your home and guaranteed for a year.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Damage beneath the taps
Bath repair in East Haven without replacing anything
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our technicians work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and people most often call us about a chip where the taps sit and snagging damage from a refit.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- East Haven (DD7)
- Area hub
- Angus
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which usually takes two to three hours for most chips. If we find something your pictures didn’t show, we will explain it before carrying on.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the following day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
Getting a price
Send us a photo of the damage and a wider shot of the whole item, with your DD7 postcode, and we will reply with a fixed quote.
Related advice
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Clean with warm water and a mild detergent
- Check that an acrylic bath doesn’t move when you stand in it
- Do not leave a fresh chip for long
- A dripping tap stains enamel, so fix it early
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Nearby places to East Haven
Also in East Haven
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why East Haven customers choose us
- Most jobs done in one visit
- Straight answers about what a repair can do
- Nothing taken out or refitted
- Free fixed quotes from pictures
Take a look at our pricing or guide to resurfacing and replacement costs.
What affects the price in East Haven
Repairs from £95. There is no charge for travel to East Haven. The price comes down to:
- The type of damage
- Where the damage is and how we get to it
- Doing more than one item at once
- Unusual colours or finishes
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- One picture of the entire bath
- A coin beside the damage so we can judge size
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
East Haven and the surrounding area
East Haven is about 4 miles south-west of Arbroath, in Angus. Clients in East Haven get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. East Haven is one of 40 places in Angus we cover. Our nearest city page is Edinburgh, about 45 miles away.
All of DD7 is covered. Jobs here include addresses on Torrie Park and Beach Road. Close by, we cover Panbride (1 mile west), West Haven (2 miles south-west), Balmirmer (2 miles north-west), Carlogie (2 miles west) and Carnoustie (2 miles south-west). We also work in nearby towns such as Arbroath (4 miles north-east), Forfar (12 miles north-west), Brechin (15 miles north), Hunter's Town (3 miles south-west), Gardynebourg (3 miles south-west) and Letham (9 miles north-west).
Near you in East Haven
Around East Haven, we work in homes near Carnoustie High School and Loupin' On Stane, among other places. The closest station to East Haven is Carnoustie station, about 1.8 miles south-west. Other landmarks nearby include Hospital of St John the Baptist (3.4 miles north-east) and Panmure Castle (2.9 miles west).
What we’re called out for in East Haven
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
Look out for these signs:
- A hole punched through by something heavy
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
- Damage beneath the taps
What to look for in a quote
- Is the price fixed, and does it include VAT?
- Whether there are any call-out or travel charges
- How your room will be protected
- When it can be used again
What we cannot put right
We will always be straight with you, so here’s what a repair won’t do:
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Your questions about bath repair in East Haven
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What happens after I send pictures?
We come back with a fixed price, usually with dates to choose from. There’s no obligation to book.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in East Haven.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Landlords, agents and businesses in East Haven
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
