Argyll and Bute · Scotland

Bath chip & crack repair in Ardfern, Argyll and Bute

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Ardfern, with a one-year guarantee on every repair.

  • Repairs from £95
  • A chip where the taps sit
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Ardfern

Can I fix it myself?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

How we handle bath repair in Ardfern

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, typically in a single visit. We are often asked to fix a hole punched through by something heavy and chips under the taps, in whirlpool & spa baths, cast iron enamel and pressed steel enamel.

Every job is backed for twelve months in Ardfern and everywhere else. If something goes wrong with the work, we come back.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
Ardfern (PA31)
County
Argyll and Bute
Cover
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

What your bath is made of matters

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

How the visit works

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a morning or an afternoon. Before leaving, we tell you when it can be used and how to look after it.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the next day.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Have somewhere for us to park nearby if possible
  • Make sure the room can be ventilated

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Send pictures for a quote

Related advice

For landlords and businesses

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Common questions in Ardfern

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How invisible is a bath repair?

On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

Do you come to Ardfern?

Yes. We work across the UK and travel to Ardfern. Send pictures and we will quote, or call 0345 017 0787.

Can pets and children be at home?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Is my repair covered?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Tell us about it when you send pictures.

What areas do you cover?

We cover the entire UK, including Ardfern and the rest of Argyll and Bute. Just include your postcode and we’ll offer you dates.

When a repair isn’t the answer

A few problems are outside what a surface repair can do:

  • A bath that moves underfoot, until its support is fixed
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Water coming from the waste or taps rather than the bath

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths

Should you replace it?

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.

Why choose Surface Doctor in Ardfern

  • Fixed prices from your photos
  • Colours mixed by hand to suit your surface
  • Rooms protected and left tidy
  • Every repair guaranteed for a year

Take a look at our prices page or guide to resurfacing and replacement costs.

Keeping it looking good

Much of the damage we repair could have been avoided. These habits help:

  • Do not leave razors or cans standing in the bath
  • Don’t scrub with anything abrasive
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Give the bath a quick rinse after use

Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.

Our work in Ardfern

Ardfern is about 34 miles west of Helensburgh, in Argyll and Bute. Anywhere in PA31, a technician comes to you. Our technicians cover all 118 towns and villages across Argyll and Bute. We work right across the region, from Ardfern to Glasgow (54 miles away).

We cover every part of the PA31 postcode area and the streets around it. If you are just outside Ardfern, we cover Craobh Haven (2 miles north), Barravullin (2 miles north-east), Kilmartin (4 miles south-east), Kilmelford (6 miles north-east) and Kilmichael Glassary (7 miles south-east). Larger places within reach include Ceann Loch Gilb (11 miles south-east), Lochgilphead (10 miles south) and Ardrishaig (12 miles south). If you are somewhere remote, call first so we can plan the visit.

What’s near Ardfern

We visit homes around Craignish Parish Church, among other places. Further afield, we also cover the area around Craignish Castle (2.4 miles south-west) and Kilmartin Museum (3.8 miles south-east). For a walk, there is Loch Ederline and Druim an Achanarnich.

Map of Ardfern © OpenStreetMap contributors

Common problems we fix in Ardfern

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.

Common reasons people in Ardfern contact us include:

  • Scuffs and scratches in the surface
  • A failed DIY repair that is discoloured or lifting
  • Chips under the taps
  • Rusty patches near the plughole

Before you book anyone

  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • Is the price fixed, and does it include VAT?
  • How soon you can use it again

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.