Argyll and Bute · Scotland
Bath Repair for Kilmichael Glassary homes
Problem with your bath in Kilmichael Glassary? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Snagging damage from a refit
- Holes from dropped items
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
How we handle bath repair in Kilmichael Glassary
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. If you are dealing with an old repair that has yellowed or come loose and chips on the rim or sides, we can typically put it right, whatever the material.
Every job is backed for twelve months in Kilmichael Glassary and everywhere else. We return to put right any problem with the work.
- Where
- Kilmichael Glassary (PA31)
- County
- Argyll and Bute
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Flexing caused by a failed cradle or loose feet
- A steel bath rusted through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Towns and villages near Kilmichael Glassary
What else we do in Kilmichael Glassary
When to call us in Kilmichael Glassary
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
It’s worth getting a quote if you see:
- A cracked acrylic bath
- Scratches you can feel with a fingernail
- Snagging damage from a refit
- Holes from dropped items
What to look for in a quote
- How soon you can use it again
- How changes to the job are handled
- How your room will be protected
- Whether there are any call-out or travel charges
Work for landlords and builders
Landlords, letting agents and housing providers in Kilmichael Glassary use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Don’t leave razors or cans standing in the bath
- Ensure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Get a dripping tap fixed promptly
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How the visit works
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow two to three hours for most chips from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Kilmichael Glassary: your questions answered
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Which areas do you work in?
All of Argyll and Bute, and the rest of the UK. There’s no extra charge for travel.
How long does the repair take to cure?
Normally the day after. We confirm the time before we leave.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
How do I get a price for bath repair in Kilmichael Glassary?
Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Our work in Kilmichael Glassary
Kilmichael Glassary is about 28 miles west of Greenock, in Argyll and Bute. We visit customers in Kilmichael Glassary and the surrounding area, so nothing has to leave your home. Kilmichael Glassary is one of 118 towns and villages in Argyll and Bute where we work. You can also see our page for Glasgow, about 48 miles away.
Here we cover the PA31 postcode area. If you’re just outside Kilmichael Glassary, we cover Bridgend (1 mile south-west), Cairnbaan (2 miles south-west), Lochgilphead (3 miles south), Ceann Loch Gilb (3 miles south) and Kilmartin (4 miles north-west). If you are somewhere remote, ring us first and we’ll plan the trip.
What’s near Kilmichael Glassary
Locally, our jobs take us to homes close to Kilmichael Glassary Parish Church. Further afield, we also cover the area around Duntrune Castle (4.2 miles west) and Argyll and Bute Hospital (3.1 miles south). For a walk, there is Lochan Add.
Repair or replace in Kilmichael Glassary?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. The price reflects the work involved, not your postcode. You’ll see the full price before booking.
What you get with us
- Nothing taken out or refitted
- Most jobs done in one visit
- Honest advice, even when it means no job
- Colour mixed on the day to match
See our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
