Leicestershire · England
Bath chip & crack repair in Arnesby, Leicestershire
Local bath repair for Arnesby: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
Bath repair at your home in Arnesby
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We work on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and people most frequently call us about rust by the waste and overflow and chips caused by builders.
Every repair is covered by a one-year guarantee, wherever you are in Leicestershire.
- Location
- Arnesby (LE8)
- County
- Leicestershire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Replacing a fitted bath typically means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- One visit for most repairs
Read our prices page and guide to resurfacing and replacement costs.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Put a towel in the bath if you’re working above it
- Do not leave razors or cans standing in the bath
- Clean with warm water and a mild detergent
- Don’t scrub with anything abrasive
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
When to call us in Arnesby
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The most common problems we are called about are:
- A failed DIY repair that’s discoloured or lifting
- Scuffs and scratches in the surface
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
What your quote should include
- How long it needs to cure
- Who turns up on the day
- What preparation is included
- What protection goes down before work starts
How it works
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours, depending on the damage. Before leaving, we tell you when it can be used and how to look after it.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
Get a quote
If you are in Arnesby and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
What a repair can’t fix
It helps to know what we cannot do too:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we’ll tell you honestly.
Materials we work on in Arnesby
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Nearby places to Arnesby
Also in Arnesby
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Your questions about bath repair in Arnesby
How do I get a price for bath repair in Arnesby?
Repairs from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your LE8 postcode.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Are there extra charges for Arnesby?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What happens after I send photos?
You will get a fixed quote back, usually with dates to choose from. There’s no obligation to book.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Where we work around Arnesby
Arnesby is about 4 miles south of Wigston, in Leicestershire. Across the LE8 area, we carry out the work at your property. We work in 287 places across Leicestershire, from the larger towns to small villages. We work right across the region, from Arnesby to Birmingham (about 34 miles away).
Postcode districts we cover here: LE8. That includes homes on Oak Lane, St Peter's Road and Church Lane. We also travel to Shearsby (1 mile south-east), Kilby (2 miles north), Fleckney (2 miles east), Saddington (3 miles east) and Wistow (3 miles north-east). Further out, we also cover Hinckley (12 miles west), Wigston (4 miles north), Syston (12 miles north), Lutterworth (7 miles south-west), Blaby (4 miles north-west) and Broughton Astley (5 miles west).
Near you in Arnesby
Our customers here include homes close to Arnesby Church of England Primary School and Church of St Peter and the streets around them. Arnesby’s nearest station is South Wigston station, roughly 4.3 miles north-west. A little further out are Wigston Folk Museum (3.7 miles north) and Kibworth Harcourt Castle (4.2 miles east).
Landlord and trade work in Arnesby
We carry out planned and one-off repairs for housing associations and facilities teams in Leicestershire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
