East Riding of Yorkshire · England
Bath Repair for Arram homes
We travel to Arram for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- A hole punched through by something heavy
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Bath repair at your home in Arram
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. If you are dealing with damage done while the bathroom was being fitted and scratches you can feel with a fingernail, we can help.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Arram (HU17)
- Region
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Before you book, it’s worth knowing the limits too:
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
- Wear across the whole surface, which needs re-enamelling
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Arram
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
More services for Arram
Covering Arram
Arram is about 3 miles north of Beverley, in East Riding of Yorkshire. We travel to homes and businesses in Arram and nearby villages, so there’s no workshop to go to. We cover all 299 towns and villages across East Riding of Yorkshire. We work right across the region, from Arram to Leeds (about 46 miles away).
Here we cover the HU17 postcode area. If you’re just outside Arram, we cover Leconfield (2 miles west), Hull Bridge (2 miles south), Molescroft (2 miles south-west), Beverley (3 miles south) and Cherry Burton (3 miles west). Larger places within reach include Driffield (9 miles north), Pocklington (15 miles west), Hessle (11 miles south), Cottingham (7 miles south), Hornsea (10 miles east) and Market Weighton (10 miles west).
Landmarks near Arram
There’s a railway station in Arram itself: Arram station. Further afield, we also cover the area around East Riding Community Hospital (2.2 miles south) and The Beverley Treasure House (3 miles south).
Work for landlords and builders
For anyone letting property in or around Arram, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What happens on the day
We work cleanly and quietly. We protect the area first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to look after it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
Ask for a price
Upload pictures of the damage and a wider shot of the entire item, with your HU17 postcode, and we will reply with a fixed price.
Advice
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Store metal items away from the bath
- Get a dripping tap fixed promptly
- Protect the bath with a towel when doing jobs nearby
- Use a soft cloth and washing-up liquid for everyday cleaning
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.
Signs you need bath repair in Arram
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Send us a photo if you notice any of these:
- Cracks in an acrylic bath
- Holes from dropped items
- A chip where the taps sit
- Scuffs and scratches in the surface
Questions to ask before booking
- When it can be used again
- Whether there are any call-out or travel charges
- What protection goes down before work starts
- How the colour is matched
FAQs for Arram
Do you come to Arram?
Yes. We work across the UK and travel to Arram. Send photos and we will quote, or call 0345 017 0787.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you price it without visiting?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How much does bath repair cost in Arram?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How we price bath repair
Prices start from £95. There’s no charge for travel to Arram. The price depends on:
- Previous DIY repairs that have to come out
- How many areas need work
- The material and finish
- The colour and finish to match
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Any details about the material
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
