East Riding of Yorkshire · England
Bath chip & crack repair in Hull Bridge, East Riding of Yorkshire
Problem with your bath in Hull Bridge? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- Rusty patches near the plughole
Bath repair in Hull Bridge without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. Whether it’s hairline or through cracks in acrylic and damage done while the bathroom was being fitted, we can help, whatever the material.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Hull Bridge (HU17)
- Area hub
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Also near Hull Bridge
What else we do in Hull Bridge
Common problems we fix in Hull Bridge
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
If you can see any of these, send us a photo:
- Scuffs and scratches in the surface
- Damage beneath the taps
- A cracked acrylic bath
- A failed DIY repair that’s discoloured or lifting
What your quote should include
- Is the price fixed, and does it include VAT?
- What preparation is included
- How the room is protected while they work
- How the colour is matched
How the visit works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon in most cases. The room is left tidy and you will know when it can be used.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
Preparing for the visit
- Point us to the nearest place to park
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Ask for a price
To get a price, send a couple of photos through our quote form or call us. We’ll say immediately whether it can be repaired.
Related advice
What affects the price in Hull Bridge
Repairs from £95. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- How many areas need work
- The material and finish
- How easy the damage is to reach
Our prices are the same across the UK, so there’s no premium for Hull Bridge. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- The material, if you know it
- Details of any past repairs
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Hull Bridge and nearby
Hull Bridge is about 2 miles north-east of Beverley, in East Riding of Yorkshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 299 places in East Riding of Yorkshire. You can also see our page for Leeds, about 47 miles away.
We work across HU17. Other places close to Hull Bridge include Beverley (2 miles south-west), Arram (2 miles north), Molescroft (2 miles west), Leconfield (3 miles north-west) and Broadgate (3 miles south-west). We also work in nearby towns such as Driffield (10 miles north), Hessle (9 miles south), Cottingham (5 miles south), Hornsea (10 miles east), Market Weighton (11 miles west) and Brough (11 miles south-west).
What’s near Hull Bridge
Typical jobs here are in homes near St John of Beverley Catholic Primary School, St. Paul's Church and Beverley High School. The closest station to Hull Bridge is Beverley station, roughly 1.4 miles south-west. Nearby you’ll also find The Beverley Treasure House (1.6 miles south-west) and East Riding Community Hospital (0.6 miles south-west).
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Hull Bridge customers choose us
- No need to remove anything
- Colours mixed by hand to suit your surface
- We’ll tell you if it’s not worth repairing
- Free fixed quotes from pictures
Read our pricing or resurfacing vs replacement cost guide.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Keep metal cans and razors off the surface
- Fix dripping taps early to stop staining and limescale
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you are working above it
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Common questions in Hull Bridge
Do you come to Hull Bridge?
We do. Repair technicians travel to Hull Bridge from across the region, with no extra charge for travel.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you redo an old repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Something went through my bath. Can it be fixed?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Landlords, agents and businesses in Hull Bridge
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
We carry out planned and one-off repairs for housing associations and facilities teams in East Riding of Yorkshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
What we can’t put right
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Wear across the entire surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
