Surrey · England
Bath Repair in Ash Vale
Local bath repair for Ash Vale: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A chip where the taps sit
- Impact holes in acrylic
Bath repair in Ash Vale, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. You can usually use the bath the day after. Our technicians work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and common reasons people contact us are deep scratches in acrylic and cracks in an acrylic bath.
Big or small, you get the same one-year guarantee.
- Location
- Ash Vale (GU12, GU14)
- Area hub
- Surrey
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
So the finish stays in good condition:
- Put a towel in the bath if you are working above it
- Rinse it down after each bath
- Check that an acrylic bath doesn’t move when you stand in it
- Clean with warm water and a mild detergent
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
Do you need bath repair in Ash Vale?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Send us a picture if you notice any of these:
- A chip where the taps sit
- Cracks in an acrylic bath
- Snagging damage from a refit
- A failed DIY repair that is discoloured or lifting
What to look for in a quote
- How soon you can use it again
- What the guarantee covers, and for how long
- A fixed quote, and whether VAT is included
- How the room is protected while they work
Landlord and trade work in Ash Vale
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Where we work around Ash Vale
Ash Vale is about 2 miles north-east of Aldershot, in Surrey. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover 395 places across Surrey, from the larger towns to small villages. You can also see our page for London, about 32 miles away.
Our visits in GU12 and GU14 work the same way as everywhere else we cover. We regularly work on streets such as Station Road East, Station Road West and Waverley Drive and the roads around them. With the B3165 and B3166 close by, Ash Vale is simple for us to get to. Other places close to Ash Vale include Ash (1 mile south), North Camp (1 mile north-west), Mytchett (2 miles north), Ash Green (2 miles south-east) and Aldershot (2 miles south-west). Within a short drive, we also cover Guildford (7 miles east), Woking (7 miles north-east), Camberley (5 miles north), Farnham (5 miles south-west), Egham (14 miles north-east) and Frimley (3 miles north).
Landmarks near Ash Vale
In Ash Vale, that means homes near Ramillies Park, St Mary's Church and The Wavell School, among other places. Nearby too are The Swan pub (within half a mile east), National Aerospace Library (2 miles north-west) and Shawfield Primary School (0.8 miles south). The nearest railway station is Ash Vale station, about 0.5 miles north of the centre. Nearby you will also find Frimley Park Hospital (3.8 miles north) and Farnham Castle (4.7 miles south-west). The countryside around Ash Vale includes Aunt's Pool and Ash Ranges.
Also in Ash Vale
Repairing versus replacing in Ash Vale
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.
What you get with us
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
Take a look at our pricing or guide to resurfacing and replacement costs.
Questions from Ash Vale
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Is a holed acrylic bath repairable?
Generally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
The process
We turn up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we can’t get to from below
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly before booking.
Materials we work on in Ash Vale
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
